-
24th June 2020, 11:08 AM
#1
Rotor and Brake pad information for 2012 4.4L TDV8
Hi all,
Just removed and replaced rotors and pads on MY2012 4.4L TDV8 Vogue Rand Rover. Information as follows
Front Pads TRW GDB1834 Rotors RDA 3088E
Rear Pads TRW GDB1824 Rotors RDA 3089E
If you are careful (and its hasn't been destroyed or cracked) you can reuse sensors.
You will need a 21mm 12 sided socket and an impact driver (or arms of steel) to remove bolts that hold front calipers on. A breaker bar will do rears. A torque wrench to tension bots when reassembling is recommended (don't want them to fall off eh!). A hex key to under rotors. Also need a can of brake cleaner and some rags, a wheel chock, a tall jack and jack stand. When doing rears don't have handbrake on or the rotors will not come off. Your will need to rotate steering wheel to allow easier access to remove the caliper. Took a couple of hours and about $1000 all up (and some new tools for the shed)
Don't rely on parts lookup programs to give you the correct pads - a lot of them are wrong!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks