Page 5 of 5 FirstFirst ... 345
Results 41 to 47 of 47

Thread: Air Suspension Fault

  1. #41
    Join Date
    Dec 2009
    Location
    Tyrendarra Vic (South West Vic )
    Posts
    1,730
    Total Downloaded
    0
    Line Values
    0 4 Current Height - 9739 247 Current Calibration
    4 6 Current Height 134 134 Current Calibration

    The current calibration of the front left sensor looks like - 9739mm. Is that right?

    - 9739mm Yes is correct

    Was the same [
    - 9739mm ] with the old sensor I replaced . Although no faults recorded until I put the new sensor in.

    Starting to think I may have a mouse problem. Chewed wires somewhere .


    Yes Laurie
    The Suspension Lock button on the main dash in the middle of the suspension height adjustment dial . It's locked , and I can't unlock no matter what I've tried so far.

    Never seen Transport mode switch . Will have to have a look see

  2. #42
    Join Date
    Jan 1970
    Location
    ACT
    Posts
    529
    Total Downloaded
    0
    Quote Originally Posted by Laurie View Post
    If you have a IID tool it's a easy job ! Most shops now charge at least 1/2 hr Labour charge for diagnostics unfortunately. I'm not sure if it can be adjusted with the IID Tool if your not the VIN registered owner ?? Some functions will work on any vehicle. Your welcome to borrow mine if it will work for you.

    Laurie
    Hi Laurie - if this offer is still available I might take you up on it...couldn't PM you as your inbox is full. Thanks

  3. #43
    Join Date
    Oct 2010
    Location
    Carindale, Brisbane, Qld
    Posts
    652
    Total Downloaded
    0
    Quote Originally Posted by 33chinacars View Post
    Starting to get majorly ****ed off

    Fitted new sensor & wiring plug ( Left hand front )
    Now up in the air on Standard Height ; Suspension lock button locked can't unlock. Pressed many times

    Air Susp Inactive displayed on dashFrom IIDTool
    ABS - Brake Module

    0 x 8A Air Suspension System CAN error
    EAS - Suspension
    0 x 1E Front Left Height Sensor fault
    Hey mate, I could not clear the fault and unlock mine eaither recently until I fixed the CAN bus error. In mine it was the radio/dvd/tuner in the back that caused the CAN bus. I disconnected all those connectors and IIDTool could clear the fault. At the moment, I suspect the CAN fault is causing your non-clearing issue? Note that any of the CAN-enabled ECUs can pull the CAN line signal to ground (or to 12v), but I understand the ente3rtainment pack and ABS are the common culprits. There is a video on line I saw which showed you how to test the OBDII diag port with a DMM in order to see if the CAN bus line was at 0v or 12v instead of the signally~4ishV.

    HTH.
    Now: 2005 L322 Vogue 4.4 M62TU (Black)
    Before: 2000 P38A HSE 4.6 - stately capability | 2008 Kluger KX-S | 2004 Forester | 2000 Yamaha XJR1300 | 1993 VR Calais | 1974 HQ Statesman - 308 V8 | HT | HK

  4. #44
    Join Date
    Nov 2019
    Location
    Brisbane
    Posts
    201
    Total Downloaded
    0
    Looks like the ABS fault is the problem there, same thing was happening to me i needed mine repaired.
    05 L322 Range Rover | BMW M62 4.4 | Cairns Blue
    07 Lexus GS450h | 2GR-FSE Hybrid | Blue Onyx Pearl

  5. #45
    Join Date
    Dec 2009
    Location
    Tyrendarra Vic (South West Vic )
    Posts
    1,730
    Total Downloaded
    0
    So after trying nearly everything under the sun ☀️ finally had to give in and take it to a Land Rover specialist.


    They replaced the EAS ECU. Problem solved l think. Computer wasn’t talking to the sensors . Have driven over 200 kms . All behaving it self so far

    Just a little bit poorer

  6. #46
    Join Date
    Apr 2015
    Location
    Hervey Bay
    Posts
    531
    Total Downloaded
    0
    Oh that sucks. You are always poorer when you have to resort to Land Rover.
    04 L322 Vogue V8 - Work truck
    07 Freelander 2 TD4 SE - The wifes
    74 Leyland P76 Targa Florio - Aspen Green
    91 Kawasaki GPZ900R


    Previous LRs = 78IIa series - 81, 93, 95 RRC - D2V8

  7. #47
    Join Date
    Dec 2009
    Location
    Tyrendarra Vic (South West Vic )
    Posts
    1,730
    Total Downloaded
    0
    Quote Originally Posted by FisherX View Post
    Oh that sucks. You are always poorer when you have to resort to Land Rover.

    That's why I do all my own work . But unfortunately not this time

Page 5 of 5 FirstFirst ... 345

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!