Results 1 to 3 of 3

Thread: 2004 Ambient Air temp sensor wiring

  1. #1
    Join Date
    Jan 1970
    Location
    Moorabbin, Victoria
    Posts
    98
    Total Downloaded
    0

    2004 Ambient Air temp sensor wiring

    Hi All,

    hoping someone has this info as I spent last night looking through Range Rover Circuit Diagrams and Electrical Library book and it didn’t quite have what I’m looking for..

    I picked my car up from the panel beaters yesterday after having the front bumper and corner light replaced from being side swiped in a car park. It was reasonable warm in Melbourne yesterday and shortly after I drove off I looked down at the dash and saw air temperature of what I thought was 40 then realised it was saying -40. Turned around and went back to the shop as I realised they must have forgotten to plug the air temp sensor in the grill back in. They took the grill off but we couldn’t locate the connector. As they were trying to close for the Easter break they said bring it back post holiday and they will sort it.
    Bit annoyed but a genuine mistake....
    On the drive home noticed the air-cond didn’t seems to be working that well (since read this sensor has something to do with it) , also car seemed to be running higher than normal idle ...not sure if this is related.


    Anyway question is does anyone know where the loom starts for the sensor, it’s not part of the PDC loom and from what I can work out it’s just 2 wires that connect somewhere in the engine bay and go to the instrument cluster. Just trying to avoid pulling the whole bumper off if I can get to it another way. Keen to get the air conditioner running properly for the Easter break

    Darren
    Regards Darren

    1981 2dr RR - Long Gone
    1997 Tdi Disco SE5 - Just Gone
    2004 L322 Range Rover Vogue 4.4 V8 Auto


  2. #2
    Join Date
    Mar 2007
    Location
    Canberra
    Posts
    780
    Total Downloaded
    0
    I think on the early L322's it's located behind the Land Rover badge on the grill, check if it's fallen down amongst the wiring loom.
    It should not be hard to locate given it's appearance and relatively short length and the fan cable etc should be off the same loom.
    Laurie
    Attached Images Attached Images

  3. #3
    Join Date
    Jan 1970
    Location
    Moorabbin, Victoria
    Posts
    98
    Total Downloaded
    0
    Decided to take the bumper bar off, wasn’t quite as daunting as I thought there’s just a lot of screw/bolts. The connector was inside the metal cross member and I wouldn’t have been able to get it out without moving the bumper bar forward. Whilst I said in the PDR loom pics I’d seen I could only see 4 connectors for the front 4 sensors it does appear as though the connector for the outside air temp is in that same loom. Anyway gave me a chance to see where the panel beaters hadn’t quite reassembled everything correctly....and fix it up.
    Attached Images Attached Images
    Regards Darren

    1981 2dr RR - Long Gone
    1997 Tdi Disco SE5 - Just Gone
    2004 L322 Range Rover Vogue 4.4 V8 Auto


Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!