Results 1 to 8 of 8

Thread: rear shock mystery part WANTED

  1. 24th October 2021, 11:27 AM #1
    rrturboD's Avatar
    rrturboD
    rrturboD is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Canberra, Australia
    Posts
    786
    Total Downloaded
    0

    rear shock mystery part WANTED

    Friday, new noise from right rear, associated with suspension. Found shock extending into passenger compartment, and top mount rubber displaced. The lower washer (boot retainer) had been pushed down the shock shaft, allowing shaft to project through top mount into passenger compartment as the suspension compressed. The washer looked like one of those push-on star lock axle caps. I used the grinder to cut it away, and looks like I have saved the chrome shock shaft.
    Pic 1 shows complete assembly after removal, with boot reattached, and new top mount.
    Pic 2 shows boot removed and 'washer' in correct position, on top of the shock shaft.
    Pic 3 close up of the washer, after removal.

    Can't find any references to this washer, so looking for advice for part number, or more likely that someone has one of these left on an old shock.
    Attached Images Attached Images
    Michael T
    2011 L322 Range Rover 4.4 TDV8 Vogue
    Aussie '88 RR Tdi300 (+lpg), Auto (RIP ... now body removed after A pillar, chassis extension to 130 & fire tender tray.)
    Reply With Quote Reply With Quote
  2. 24th October 2021, 11:40 AM #2
    350RRC's Avatar
    350RRC
    350RRC is offline ForumSage Silver Subscriber
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,502
    Total Downloaded
    0
    Any dimensions?

    It looks like a relatively common shock cup. If so Toy ones are thick, gal and strong.

    Eye watering price from Toyota ($6 each 15 or more years ago) but any aftermarket 4wd drive joint will have buckets of them. Got mine for nix and are fine after 200k km.

    DL
    Reply With Quote Reply With Quote
  3. 24th October 2021, 02:40 PM #3
    Laurie's Avatar
    Laurie
    Laurie is offline Master Subscriber
    Join Date
    Mar 2007
    Location
    Canberra
    Posts
    792
    Total Downloaded
    0
    Hi Michael

    Hope this helps

    REAR SPRINGS AND SHOCK ABSORBERS (LESS ARMOURED) - RANGE ROVER (D4) 2002-2009

    Laurie
    2010 TdV8 Autobiography, D2 Td5, RRC 4 Door VM/300Tdi, RRC 2 Door V8
    Reply With Quote Reply With Quote
  4. 24th October 2021, 04:50 PM #4
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,035
    Total Downloaded
    0
    RPK000010
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  5. 24th October 2021, 08:04 PM #5
    rrturboD's Avatar
    rrturboD
    rrturboD is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Canberra, Australia
    Posts
    786
    Total Downloaded
    0
    Thanks Laurie, that is a fantastic resource.
    MichaelT

    Quote Originally Posted by Laurie View Post
    Hi Michael

    Hope this helps

    REAR SPRINGS AND SHOCK ABSORBERS (LESS ARMOURED) - RANGE ROVER (D4) 2002-2009

    Laurie
    Michael T
    2011 L322 Range Rover 4.4 TDV8 Vogue
    Aussie '88 RR Tdi300 (+lpg), Auto (RIP ... now body removed after A pillar, chassis extension to 130 & fire tender tray.)
    Reply With Quote Reply With Quote
  6. 29th October 2021, 12:22 PM #6
    rrturboD's Avatar
    rrturboD
    rrturboD is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Canberra, Australia
    Posts
    786
    Total Downloaded
    0
    End result was to call local Land Rover dealer, wait 2 days, and parts supplied .... LR Australia carry stock because there is steady requirements. LR Recommend that the washers be replaced with shocks.
    Michael T
    2011 L322 Range Rover 4.4 TDV8 Vogue
    Aussie '88 RR Tdi300 (+lpg), Auto (RIP ... now body removed after A pillar, chassis extension to 130 & fire tender tray.)
    Reply With Quote Reply With Quote
  7. 30th October 2021, 10:34 AM #7
    landie56's Avatar
    landie56
    landie56 is offline Fossicker Supporter
    Join Date
    Aug 2013
    Location
    Howrah, Tas
    Posts
    88
    Total Downloaded
    0
    Hi,
    I know it's a bit late just read your post, but l have 2 sets of rear shock in good use, they were replaced when doing a big trip.

    Rangie10
    Jason
    Jason

    Range rover l322 2002 TD6
    Reply With Quote Reply With Quote
  8. 1st November 2021, 07:47 AM #8
    rrturboD's Avatar
    rrturboD
    rrturboD is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Canberra, Australia
    Posts
    786
    Total Downloaded
    0
    I'll remember that for next time I have my vehicle booked in for a service with Justin Cooper!
    Michael T
    2011 L322 Range Rover 4.4 TDV8 Vogue
    Aussie '88 RR Tdi300 (+lpg), Auto (RIP ... now body removed after A pillar, chassis extension to 130 & fire tender tray.)
    Reply With Quote Reply With Quote
« I just don't believe it! | Lift kit for L322 »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!