You may have to reprogram the key.
See this sticky: Explanation of the reasons for the keyfob re-sync steps
Hi all,
Changed the battery in the key as I had : low key battery: warning
on dash.
New battery didnt work so I changed back to old battery and still doesnt work.This was a new battery after I had changed it earlier last month when I first got low key battery warning.
Can get into car by using door lock,but alarm goes off and car doesnt start but can turn key to position 2.
Do I have to program the key again or is it something else.
beast is 2003 TD6 RR
DG
You may have to reprogram the key.
See this sticky: Explanation of the reasons for the keyfob re-sync steps
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
UPDATE:
Tried reprogramming keys,didnt work, BUT
Have an old key with the buttons not working anymore(hadnt had battery in it for 3 maybe 4 years)
Put new battery in it and it cancels alarm and I can start the engine.
But keyfob still doesnt work on either of them.
Also suspension wont work(had it in access mode and it raised up to standard height. )
Will get iid tool on it tomorrow when I have some time and see whats going on.
Ohh the joys of computers in cars soapbox:
DG
Gary
How is your main battery ?
Laurie
2010 TdV8 Autobiography, D2 Td5, RRC 4 Door VM/300Tdi, RRC 2 Door V8
Hi Laurie,
Main battery is good, its the only one I got.
Connected up iid tool and it had a few errors, cleared them all and some came back.
Mostly the ones that always come on.
There were a couple of odd ones that didnt have a specific number 0X??
Took it for a drive as it seems to be behaving itself, suspension lowered to hwy mode on the hwy.
Went to a locksmith and checked the rfd,s, 1 was working the other not.
My problem now is that I can only access the car by the doorlock, when I open the door,the alarm sounds until I put key
in ignition and switch to start position with key, then the alarm goes off. Also only 1 key lets me start the car( the old key with crappy buttons grrr).
So the question is:
How do I fix the alarm and how do I get remote locking synced back onto key(s).
Have tried reprogramming keys and it still doesnt work, the red light doesnt appear after you synch the key, nor does it appear when you press any of the buttons.
Could it be the bcm is kapput or is it something else.
All answers greatfully received as to my problem.
DG
I had to try reprogramming mine several times. I don't recall the exact reason(s) but you have to do both keys. You can't do only one. If you do, only that key will work.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Garry
Don't laugh, but did you use a Duracel battery ? Plenty of comments on Ffrr that some other battery brands cause troubles like your having.
Laurie
2010 TdV8 Autobiography, D2 Td5, RRC 4 Door VM/300Tdi, RRC 2 Door V8
Laurie,
Definately using Duracell, altho I read somewhere that they used Panasonic batteries when they first came out.
DG
I keep getting told that the key fob battery re-charges when you are using the key in the car.
I'm just wondering how that is possible if there is only one contact (the actual key) going into the vehicle?
How does that complete any circuit that the battery might be on?
I'm happy if they do, but I'm thinking that they don't actually re-charge.
Anybody know for sure?
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks