Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25

Thread: D5 Jack

  1. #11
    Join Date
    Apr 2018
    Location
    Queanbeyan
    Posts
    21
    Total Downloaded
    0
    I am interested in this as well as I would rather use abottle jack than standard one.
    The jacking point is completely different to D3/4, it consistsof a lug (suspect made of steel) parallel to the body which is about 100 mmlong, 25 mm high, with a maximum thickness of 15 mm with a slight taper androunded bottom with a 10 mm slot in the middle.
    The top of the jack is about 55 mm square with asemi-circular channel in the middle which is about 20 mm wide and about 5 mm ora bit deeper. The lug sits in this channel when jacking the car.
    One thing is any adapter should ensure it doesn’t putsidewise force on the lug as it could damage the body.
    I did a bit of a test and to lift the rear wheel about 6 mmoff the ground had to lift from 350 mm to 470 mm that you would means a bottlejack would have to have a 120 mm hydraulic lift and maximum height close to 470mm, and in the past, I have found it’s hard to find a jack with those specs,maybe others know where ones are available.
    At home I have a 2500 kg trolley jack and like with the D3it should just has enough lift to get the back wheel off the ground and shouldbe able use jacking points.
    I think an adapter could be made, but it’s getting the jackmaybe the problem.

  2. #12
    Join Date
    Jan 2013
    Location
    Quinn's Rocks W.A
    Posts
    198
    Total Downloaded
    0
    Hi Guys,
    picture of the D5 Jack - it has a grove in the top instead of a locating knob.87E0FFD7-BED9-4F1E-AF75-31E849DDCE4F.jpg
    Jack

    MY 2018 D5 HSE LUX
    MY 2013 D4 HSE ( gone with 155,000km )
    MY 2010 D4 SE ( gone with 100,000km )

  3. #13
    Join Date
    Jan 2017
    Location
    Geraldton WA
    Posts
    8,284
    Total Downloaded
    0
    Quote Originally Posted by GP1200 View Post
    Hi Guys,
    picture of the D5 Jack - it has a grove in the top instead of a locating knob.87E0FFD7-BED9-4F1E-AF75-31E849DDCE4F.jpg

    Hmmm
    $100,000+ car with a $2 jack, Impressive
    You only get one shot at life, Aim well

    2004 D2 "S" V8 auto, with a few Mods gone
    2007 79 Series Landcruiser V8 Ute, With a few Mods.
    4.6m Quintrex boat
    20' Jayco Expanda caravan gone

  4. #14
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,641
    Total Downloaded
    0
    Quote Originally Posted by trout1105 View Post
    Hmmm
    $100,000+ car with a $2 jack, Impressive
    Umm,i bet a $200,000 RR also has the same jack

    Oh,and $100,000 doesn't get you much of a D5.
    Paul

    D2,D2,D2a,D4,'09 Defender 110(sons), all moved on.

    '56 S1,been in the family since...'56
    Comes out of hibernation every few months for a run

  5. #15
    Join Date
    Jan 2017
    Location
    Geraldton WA
    Posts
    8,284
    Total Downloaded
    0
    I still have the original jack in my D2a and it is a good solid hydraulic bottle jack with the top of it fitting perfectly under the axels Not a cheap and nasty scissor jack that will tend to fall over easily and are absolute bastards to use.
    You only get one shot at life, Aim well

    2004 D2 "S" V8 auto, with a few Mods gone
    2007 79 Series Landcruiser V8 Ute, With a few Mods.
    4.6m Quintrex boat
    20' Jayco Expanda caravan gone

  6. #16
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,641
    Total Downloaded
    0
    Quote Originally Posted by trout1105 View Post
    I still have the original jack in my D2a and it is a good solid hydraulic bottle jack with the top of it fitting perfectly under the axels Not a cheap and nasty scissor jack that will tend to fall over easily and are absolute bastards to use.
    Actually,a Holden bottle jack from a HQ would be better,if it had the reach....

    Nothing wrong with a Defender jack either,but it probably wouldn't fit.
    Paul

    D2,D2,D2a,D4,'09 Defender 110(sons), all moved on.

    '56 S1,been in the family since...'56
    Comes out of hibernation every few months for a run

  7. #17
    Join Date
    Jan 2017
    Location
    Geraldton WA
    Posts
    8,284
    Total Downloaded
    0
    I would imagine that the majority of people that are buying the new D5's wouldn't know how to change a tyre anyway So the jack itself isn't that critical
    You only get one shot at life, Aim well

    2004 D2 "S" V8 auto, with a few Mods gone
    2007 79 Series Landcruiser V8 Ute, With a few Mods.
    4.6m Quintrex boat
    20' Jayco Expanda caravan gone

  8. #18
    Join Date
    Oct 2011
    Location
    Hunter Valley
    Posts
    513
    Total Downloaded
    0
    Looks like I will need a new bottle-jack adaptor.

    Ron
    2016 D4 TDV6 Corris Grey
    --------------------------------------------------------
    2018 D5 TD6 SE Silicon Silver - gone
    2011 D4 TDV6 2.7 Indus Silver - gone
    IIDTool BT

  9. #19
    Join Date
    Jan 2013
    Location
    Quinn's Rocks W.A
    Posts
    198
    Total Downloaded
    0
    To be honest, only had to use the D4 jack ( nearly the same as the D5 jack ) once at the bottom of the Yeagarup Dunes a few years ago - but changed all the tyres on a mates Jeep when it decided to go into limp mode and roll its tyres off the rims when it wasn’t having a hissy fit.... ( a very very long story... )

    The factory Jeep jack broke on the first change and the $2-00 Land Rover jack did its thing.

    if anyone knows The Widowmaker dune in Yeagarup, it’s not the sort of place to be changing all the tyres on a vehicle that is stuck.

    Yes we used common sense and had wood blocks and did it safely, and yes a nice trolly jack would have been nice, but the beers that night tasted a little better knowing that we recovered
    the vehicle using a $2.00 Land Rover jack and a bit of grunt work....

    so so lay off the jack....
    ( no pun intended )
    Jack
    Jack

    MY 2018 D5 HSE LUX
    MY 2013 D4 HSE ( gone with 155,000km )
    MY 2010 D4 SE ( gone with 100,000km )

  10. #20
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by Rovingwill View Post
    I am interested in this as well as I would rather use abottle jack than standard one.
    The jacking point is completely different to D3/4, it consistsof a lug (suspect made of steel) parallel to the body which is about 100 mmlong, 25 mm high, with a maximum thickness of 15 mm with a slight taper androunded bottom with a 10 mm slot in the middle.
    The top of the jack is about 55 mm square with asemi-circular channel in the middle which is about 20 mm wide and about 5 mm ora bit deeper. The lug sits in this channel when jacking the car.
    One thing is any adapter should ensure it doesn’t putsidewise force on the lug as it could damage the body.
    I did a bit of a test and to lift the rear wheel about 6 mmoff the ground had to lift from 350 mm to 470 mm that you would means a bottlejack would have to have a 120 mm hydraulic lift and maximum height close to 470mm, and in the past, I have found it’s hard to find a jack with those specs,maybe others know where ones are available.
    At home I have a 2500 kg trolley jack and like with the D3it should just has enough lift to get the back wheel off the ground and shouldbe able use jacking points.
    I think an adapter could be made, but it’s getting the jackmaybe the problem.
    Thanks for the detailed description.....I was going to get and adaptor made up but maybe it isn’t as straight forward as the D3/4

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!