Page 4 of 4 FirstFirst ... 234
Results 31 to 35 of 35

Thread: Caravan electrical connections

  1. #31
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    If the 2 resistors are joined together without the earth connection then current from a live blinker wire will flow through both resistors to the other blinker wire as the LED blinkers require very little current to operate, much less than that lost (converted to heat) by the resistors.

    I've been mindful of our history since you joined the forum. LY was worse drought than the year before but this year is looking promising.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  2. #32
    Join Date
    Nov 2009
    Location
    Melbourne
    Posts
    245
    Total Downloaded
    0
    So, as long as the resistors are connected to earth at one end and to the separate indicator wires at the other, all is well? It is basically the same as wiring in a 21 Watt globe. All earth wires are a common ground, so connecting the two earth wires to the same earth cable is okay?

    But, the switches should be on the indicator side of the resistor? Or doesn't it matter?

    I'll keep my fingers and toes crossed for good rains for you. It was certainly dry along the Darling.

    Cheers
    Numb Thumbs

  3. #33
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    The switch (pair) can be fitted to either side of the resistors and the earths are common as for 2 globes.

    We may shortly make a quick trip to Wentworth then up the Darling a little, possibly to Menindee. I was last up that way in 96 en-route to the corner, so longing for a revisit.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  4. #34
    Join Date
    Nov 2009
    Location
    Melbourne
    Posts
    245
    Total Downloaded
    0
    Thanks, Graeme.

    Here is the link to the writeup from our recent trip:

    A Darling River Run in the times of Covid - Out and about with the Vista - Australia4WD Forum

    Have a great time - we did!

    Cheers
    Numb Thumbs

  5. #35
    Join Date
    Nov 2009
    Location
    Melbourne
    Posts
    245
    Total Downloaded
    0
    Job done. Thank you Graeme and Hugh Jars!

    I have wired up the resistors and they seem to work.

    The wires you are looking for are plain yellow and plain green, as per the Australian Standard.

    Cheers
    Numb Thumbs

    Here are some photos after the effect...

    Overview:



    In a bit closer:



    Wiring:



    Resistors closeup:



    The switch in the jack storage area:


Page 4 of 4 FirstFirst ... 234

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!