Results 1 to 4 of 4

Thread: Bonnet release handle

  1. #1
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0

    Bonnet release handle

    Can anyone advise if the handle stays with the side panel when the side panel is removed or the handle needs to be removed first? If first, is there a trick to removing the handle?

    TIA,
    Graeme
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  2. #2
    Join Date
    Nov 2009
    Location
    Melbourne
    Posts
    245
    Total Downloaded
    0
    The group wisdom on the Facebook group - international one - is to rotate the handle and then slide off to the right away from the panel. Can take a bit of force, apparently, but just be careful. Good luck...

    Cheers
    Numb Thumbs
    Fuji White 2019 SE Sd6

  3. #3
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    Thanks for the info. I'll pass it on to the person in Canada embarking on fitting a kit.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

  4. #4
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    11,475
    Total Downloaded
    0
    The D5 owner found reference to a clip that has to be removed and has since removed the handle.
    MY12 RRV 4.4 TDV8 AB, +LLAMS, +e-diff, +ACC stop/go. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!