I have decided to to go the Redac route.
Elecbrakes - Bluetooth Electric Brake Controller | elecbrakes
anyone used this controller?
I have decided to to go the Redac route.
I can confirm that there is no need to rearrange the pins on MY20 either.
I used the Tekonsha 3035-P cable to install a Tekonsha P3 and all I had to do was plug it in.
It appears that the vehicle wiring was different on the OPs earlier model L494.
Ive attached a photo of my install which shows the blue wire on the vehicle going to the bottom right of the connector (when viewed with the keying up)
In the OPs post it shows the vehicle blue wire going to the top right of the connector so clearly there has been a change.
I worked out the year model from the post , what I wold like to know is where others are mounting the button or interface, I would like not to drill holes if possible.
Great info and now I join the ranks of a brake controller installed RRS. Thanks to the board I was able to pick the steering column as the place to mount the controller and am well pleased.
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks