Hi, I have been having issues with shopping falling out the back of the RRS when I open the back door... wishing it had a 2 piece door like my old volvo XC90 (or FFRR, D3/D4) . Anyway I thought I would conjure up a manually deployable shopping-falling-out probability reducer. Just clips on to the load loops, and folds away for easy storage (at least it might if I used countersunk screws on the hinge) . At this stage it only uses 50mm high aluminium, because that's all I could find in right angle at the hardware shop, if it seems to be actually helpful I might increase the height and use a better hinge. Anyone else made something similar? I'm sure JLR could make this accessory and sell it for about $3,590.
Gone - RRS SE SDV6 with Dynamic MY15.5 Yulong White, with LLAMS
Good thinking. You can buy angle that’s about 150x50 that I know of, and I’m sure you could probably get it even bigger if you wanted. You’d need to go to a specifically alloy dealer though. The other 💭 is if all you want to do is extend it a bit, just get some flat plate to rivet/bolt straight to what you already have.
Thanks SBD4 - This one actually looks promising, I have not noticed this item before, not sure why. ... would have to think about how to store it in the car when not in use.
Edit: I now know why I haven't noticed this before, it is not actually a L494 accessory as far as I can tell, L494 has no holes to hold it in place.
...Greg
Gone - RRS SE SDV6 with Dynamic MY15.5 Yulong White, with LLAMS
An easier solution, which I have been doing in all my cars over the years, is to buy a non-slip mat for the boot, and then just place 2 ammo boxes there.
The non-slip mat I get from the local hardware store and they cut it to size.
Bookmarks