Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: Tdv6 shaking

  1. #21
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Is the diff dampener still there? A mate with a D5 chased a bad vibe and didnt find it,,, looked at the rear axle, bracket was there but no dampener...
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  2. #22
    Join Date
    Oct 2020
    Location
    Brisbane, Australia
    Posts
    25
    Total Downloaded
    0
    Quote Originally Posted by Gregz View Post
    Mine is a SDV6, but yes, there is a slight vibration through the steering wheel at idle. Idle appears to be about 700rpm or perhaps slightly less on the tacho. increasing rpm to 800, by pressing the accelerator ever so gently , seems to reduce the vibration significantly. And there are various spots in the rev range that have differing vibrations through the steering wheel, but idle seems to have the most significant vibrations.
    any resolution to this vibration at idle fault ?

  3. #23
    Join Date
    Oct 2020
    Location
    Brisbane, Australia
    Posts
    25
    Total Downloaded
    0
    Quote Originally Posted by Donny View Post
    Hi all, firstly like to say g’day, and looking forward to getting to know you all, hopefully as enthusiasts and not problem solvers!!

    I’ve got a tdv6 l494 2016, all of a sudden she’s got a nasty shake/humm in the steering wheel only at idle (c.700rpm). Workshop said it was probably the two engine mounts, so they changed them, but the shake is still there. Any ideas what could be going on? Or is this normal and I have just lost my mind? Car sounds a little lumpy, but they reckon the diagnostic tool not showing any issues...Open to suggestions either way
    Did ypu get a resolution to this vibration at idle fault ?

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!