Wanted to add this to AULRO as I have posted this elsewhere as well.
Hope it helps others.
Installed a Redarc TowPro today. For those of you in the US and Aus may be useful details. Note the preinstalled wiring harness on the Defender may only be there in Australia.
The landrover uses a Ford plug (still to this day) and is located above and to the right of the accelerator pedal (for RHD).
Need to remove the hood latch panel cover by the accelerator pedal. Pull straight back after "unpopping" the trim piece that says defender (the sill plate)
The Tekonsha 3035-P wiring harness fits plug and play. Patched into the Redarc and then installed the knob under the lighting control. You don't need to try and remove that blank like I did, just pop out the whole little box thing. Super easy.
Towing controller tucks in on the right side close to the plug.
had to point my auto electrician to the wiring harness when we had it installed, Anderson was being done so thought they could supply
and fit the redarc at the same time, he was going to "tap in" to the rear loom before i pointed him to the LR manual and the ready made
plug
Bookmarks