Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: iTech120 Lithium battery

  1. #1
    Join Date
    Dec 2009
    Location
    Ranelagh, Tasmania
    Posts
    1,533
    Total Downloaded
    0

    iTech120 Lithium battery

    Has anyone got an iTech120? The specs look good and it has in-built battery management so it should be ok hooked up to the Traxide SC-80.

    Don't bother telling me I should just get a lead acid as I understand the differences. I want the light weight and the increased capacity.
    Fuji white RRS L494 AB

  2. #2
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,768
    Total Downloaded
    0
    Hi Geedublya, unfortunately, you can not use a Lithium battery with a VSR isolator, mine or any other brand.

    VSR isolators will not turn off because of the higher constant voltage of a lithium, and even if you keep the batteries connected, you will only be draw current from the lithium battery until it is down to around 20% SoC. Only ten will you be drawing off the cranking battery.

    The only way to set up to use a lithium battery as an auxiliary battery is to disconnect the batteries when the motor is turned off.

    In other words, an ignition switched type isolator.

    Because you can not use the cranking battery while camping, a 120Ah Lithium battery only gives you a very small increase in capacity, and the weight saving is not much better either.

  3. #3
    Join Date
    Dec 2009
    Location
    Ranelagh, Tasmania
    Posts
    1,533
    Total Downloaded
    0
    Thanks Tim, it still may be useful as a house battery in the caravan and then I could put the 150AH AGM from the caravan into the car,
    Fuji white RRS L494 AB

  4. #4
    Join Date
    Jul 2009
    Location
    Hobart
    Posts
    3,300
    Total Downloaded
    0
    Hi,
    Interesting that it claims to be "drop in". So did my Fusion 200 AH. But the charging profiles on the tech sheets, if I am reading them correctly, would indicate that a lead acid charging profile is not ideal.
    I am still using an SC80 Traxide isolator, but it feeds a dc2dc / MPPT solar charger. This saved me a bit of wiring, and is backward compatible if I ever go back,
    Is there a noticible difference between the lead vs lithium?
    Well I cobbled the wiring together for a trip last weekend.
    Charged the battery to float on a mains lithium charger and left.
    Camped for 2 nights (fridge, lights, diesel heater) and the voltage barely moved.
    Coming home, the battery was back to float after about 30 minutes driving.
    No way would I see that with the old battery.
    Cheers

  5. #5
    Join Date
    Mar 2016
    Location
    Adelaide
    Posts
    2,022
    Total Downloaded
    0
    Quote Originally Posted by drivesafe View Post
    Hi Geedublya, unfortunately, you can not use a Lithium battery with a VSR isolator, mine or any other brand.

    VSR isolators will not turn off because of the higher constant voltage of a lithium, and even if you keep the batteries connected, you will only be draw current from the lithium battery until it is down to around 20% SoC. Only ten will you be drawing off the cranking battery.

    The only way to set up to use a lithium battery as an auxiliary battery is to disconnect the batteries when the motor is turned off.

    In other words, an ignition switched type isolator.

    Because you can not use the cranking battery while camping, a 120Ah Lithium battery only gives you a very small increase in capacity, and the weight saving is not much better either.
    Same deal using the USI160 controller?
    "Land Rover - making mechanics out of everyday motorists for nearly 70 years"

  6. #6
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,768
    Total Downloaded
    0
    Quote Originally Posted by John_D2 View Post
    Same deal using the USI160 controller?
    Unfortunately, yes.

    The only way to charge and maintain lithium batteries properly, is by using a DC/DC device.

    I have been helping people setup caravans with lithium house batteries for nearly 7 years now.

    While I originally set up a good friends D4, as an experiment, with one of my isolators. The setup was quickly converted to a DC/DC charging system, using Sterling gear.

    I still help customers set up with the same Sterling gear, and these same setups are idea for Lead Crystal house batteries as well.

  7. #7
    Join Date
    Mar 2016
    Location
    Adelaide
    Posts
    2,022
    Total Downloaded
    0
    Bummer. Thanks
    "Land Rover - making mechanics out of everyday motorists for nearly 70 years"

  8. #8
    Join Date
    Sep 2012
    Location
    Adelaide Hills
    Posts
    13,298
    Total Downloaded
    0
    Quote Originally Posted by drivesafe View Post
    The only way to charge and maintain lithium batteries properly, is by using a DC/DC device.

    help me out if, if an alternator puts out 14.6 volts
    and a lithum battery charges at 14.6 volts, why is a DC/DC charger needed?

  9. #9
    Join Date
    Jan 1970
    Location
    Queensland
    Posts
    7,768
    Total Downloaded
    0
    Hi Eevo, 14.6v is the absolute maximum charge voltage most lithium batteries can safely tolerate.

    Once a lithium battery reaches a fully charged state, the voltage should be lowered to no more than 13.8v, 13.6v is preferable.

  10. #10
    Join Date
    Jul 2009
    Location
    Hobart
    Posts
    3,300
    Total Downloaded
    0
    Hi,
    there is a bit of info here.

    Lithium Vs Lead Acid >> Marsen

    Cheers

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!