Usually when I connect a balance hose to a snorkel set-up I drill into the adaptor where it goes through the mudguard. The picture is from another AULRO member's snorkel install. If you connect to the clean side of the element you will not get the same power/airflow relationship as you had before. You would then possibly need a smaller mixer on the manifold. As I said before, it is the total restriction of the intake (up to the balance hose) that determines the gas mixture. If you change the intake length to the balance point it will certainly change the mixture. When you have finished just turn the main mixture 1/4 turn in either direction and test drive. You want the minimum amount of gas to give you maximum power. Any more is a waste.

