Thread: rough at the lights!

Have a look at the IAC (Stepper motor) if gunked up with carbon could play up. Remove and spray carby cleaner on the valve and in the hole. Also check the vacuum lines at rear that runs to Fuel reg ( rear of steeper motor on motor, it has a roughly 1/4 inch rubber hose, not easily seen, use you hand to feel.)

thanks roverlord, ill give it a go on the weekend, just have to find it!

cheers

Laurie

Originally Posted by laurie02

thanks roverlord, ill give it a go on the weekend, just have to find it!

cheers

Laurie

Drivers side, on side of plenum, a squarish plug with wires coming out of it.
unclip connector and unbolt it to remove.
PIC link.

wow, rover lord, thank you so much!

so cool roverlord.....I pulled that thing off, stepper thing....gave it a good clean, what I thought was a thread inside actually turned out to be a spring!

haha, junked up alright, should have seen the KR*P come out of it!

runs ok now, but seems to be getting better the further I drive, so the weekend will tell all!

heavy on the juice and gas, methinks a tune and service by someone who knows what they are doing vis a vis land rovers and the truck will be perfect!

(after I get the cruise sorted!)

cheers

Laurie

Hi Laurie did you spray some cleaner into the hole you took the stepper out of as that gunk on the steeper will also be in there. It'll smoke a bit after you start it.
The using lots of juice could also be leaking injectors, or a problem with the maf. A stuffed maf can enrich the mixture. Are your spark plugs carboned up also????

Cruise is usallay just a hose vacuum leak, check all sections of hose by sucking on them, no hold of suction will determine what part of hose. Also check the switches on pedal assebly, they are vacuum valcves, when pedal is up they should hold vacuum, and when pedal is pressed they exhaust vacuum.
The actual switch has a plunger on it, it is on a rachet, if it is not locking vacuum, you can carefully pull on ther plunger and pull it out slightly to ensude it touches the pedal.
Manual D1s have one on clutch pedal and one on brake pedal.

hope this helps. cheers, Mario

hey roverlord!

thanks for being so helpful, i'll check out all this stuff out on the weekend, if it stops raining!

BTW took the disco for a bit of a drive up some trail bike tracks in the rain today, i'm pleased to report difflock and low are all working fine!

now for a bulbar, winch and some poly bags for the back!

cheers and thanks

Originally Posted by laurie02

hey roverlord!

thanks for being so helpful, i'll check out all this stuff out on the weekend, if it stops raining!

BTW took the disco for a bit of a drive up some trail bike tracks in the rain today, i'm pleased to report difflock and low are all working fine!

now for a bulbar, winch and some poly bags for the back!

cheers and thanks

It's a wonder you haven't had snow in Ballarat. it's bloody cold.