-
Hi,
Well I am still working on this, it has been narrowed down to O2 sensors, MAF and fuel pump as possibilities, and it may turn out to be a combo of these
I have replaced the O2 sensors and immediately it ran much better, I also replaced the MAF
SO things are much better now but still a little misfire under heavy load at high revs
Next job is to replace the fuel pump :eek:
Steve
-
Hi
A few iterations later I have replaced;
Fuel pump, had low fuel pressure
MAF, it was dodgy
O2 sensors, they needed replacing
Reset the adaptive values and let the system settle down.
Still missing on LPG :censored:
Saw a post on another forum about dirty connectors, so I got some deoxit and used it on all the LPG connectors.
Whoo hooo 5000 RPM and no misfire :D
So a number of things and all seems good now .. i hope :angel:
Steve