Can you identify this System?

Actually, my connect cable is like that above but USB, not RS232.

I loaded the software onto another laptop this arvo and checked my system but I can't see anywhere to read the firmware version.

So it looks like I am in a bit of a Catch 22 situation.
Seems like KME make the G3 but its then re branded with firmware that only responds to the branded software.
I have tried KME original from their website ( 2 versions )
Scrocco
AKME ( thanks Ron)
Anyone else got any software for G3 clones that I can try or is there a Trade Secret that someone can tell me.
My system was installed mid 2009.
Anyone got a G3 with software for sale.

G`day ,

SZ7EA8 from you pics is giving you your controller ID .

Software for LPG Autogas Systems

Downloaded the software from the link and slightly different but same result.
See screen-shot attached.

I just had another look at your first post and saw that the first pic has a Fach SA (another Polish company) label.

FACH S.A.

I assume that label is on the injectors.

Wtryskiwacz LPG | FACH S.A.

https://www.aulro.com/afvb/images/im...2014/05/95.jpg

Wayne, the LPG compliance plate should show the name of the system installer. Have you tried contacting them?

The injectors are referred to in the instructions you sent me "Taurus" and also their website so I suppose they are part of the KME kit. I did try the installers but the reply was its to hard, I have only been here a year and it was in 1999.
In your instructions I have just noted the numbers on the units plugs relate to the firmware, i will try and decipher tomorrow

1999 doesn't sound right.

My KME is marked 2007 and that one of yours looks later than mine. Mine's not on the current site, only on the old KME site.

I just taken mine out of the car to get some pics.

Have a look on the side of the black socket on the unit. Mine has a date stamp 11/2007. You may not be able to see that 07 is moulded into the sockets, too (the circular clock-like embossing on the sockets).

The no. 67R-013787 on the plug is also on the label on the case. Ditto with the other number.

http://www.aulro.com/afvb/attachment...1&d=1401361623

http://www.aulro.com/afvb/attachment...1&d=1401362461

http://www.aulro.com/afvb/attachment...1&d=1401362533

My mistake, 2009.

Numbers from my unit are

SZ7 EA8 000019
8-032 6411
07091024030c
CT7-E 8TR
00008 04/09

Only thing I can get from that is 04/09 manufacturing date
Screen shot of KME instructions on how to identify, makes no sense

Wayne, I was searching the 'net for info on the KME vacuum/pressure sensor (mine appears to be sensitive to movement) and found there is a Facebook page called KMEclub.

https://www.facebook.com/KMEClub

It might be worth your while asking there. It's in Thai but one can translate it.

Have you seen this instruction manual?

http://www.autogaz.lv/downloads/dieg...30J-manual.pdf