Printable View
Only getting 14psi from the turbo, i was looking for 20psi, i will wire the wastegate shut and see if that helps.
Can cruise comfortably on the highway at 110kph now.
Low range and high range performance is the same as my county.
6x6 weighed in at 3120kg
Sent from my SM-G900I using AULRO mobile app
Almost the weight of a Nissan Safari!
Sent from my Nexus 4 using AULRO mobile app
How does it drive now that you have taken 400 to 500kg off the rear axles?Quote:
Originally Posted by samuelwest
My pregnant wife says it's rough haha i think its fine, the welder and compressor come in at 800kg so should settle it down a little.
Also fitting a large stainless water tank and slide out drawer at some stage. Fitting a billet 6 point breather at the moment, 3 points for the diffs, gearbox,transfer and winch
Sent from my SM-G900I using AULRO mobile app
Great job I wish I lived closer I'd drop by with mine for inspiration, love the truck stack might do the same :D
What spring is in the wastegate actuator?? Mine came with a 7psi, changed it to a 22psi and adjusted the actuator, now running 28psi. Same turbo as you😊Quote:
Originally Posted by samuelwest
I think it's the 22 psi spring, it the dark blue one. I adjusted the wastegate by 3 turns after closed, is there another way to adjust the wastegate? I don't know much about turbos or wastegates. Im just winging it at the moment haha
Sent from my SM-G900I using AULRO mobile app
samuel
you have done great job love build on tray really sets it off look foward to see your next stage
look foward to seeing you on road some
cheers cooee
Keep adjusting the actuater rod, I did mine more than 8 turns I think, but also need to adjust the fuel. From memory fuel screw is out about 3.5 turns.Quote:
Originally Posted by samuelwest