-
18th April 2019, 09:19 AM
#1
Size of No5 army trailer pintle lunette (ring) shank
Hi All,
Could someone help me with the length and diameter of the pintle lunette/ring shank so I can match it?
Cheers,
Dave
-
21st April 2019, 09:23 AM
#2
I can see in some AULRO pics it has a shank with a step down- wanting the outside of the shank diameter where it is large and the total length from the ‘face’ at the rear of the ring to the shank end (overall not just the large part).
Cheers,
Dave
-
24th April 2019, 05:34 PM
#3
Bought one!
Shaft is 1.5” through housing. Thread is stepped down to 1”. Shaft and thread about 4.5”s. Various washers and lock/unlock thingy on shaft. Bolt holes for drawbar are 5/16 (could be mistaken).
Dave
-
24th April 2019, 07:41 PM
#4
The mounting bolts should be 3/8 UNF
Aaron
-
27th April 2019, 03:59 PM
#5
You are correct! Cheers Dave
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks