Results 1 to 5 of 5

Thread: Size of No5 army trailer pintle lunette (ring) shank

  1. #1
    Join Date
    May 2007
    Location
    Denmark WA
    Posts
    668
    Total Downloaded
    0

    Question Size of No5 army trailer pintle lunette (ring) shank

    Hi All,
    Could someone help me with the length and diameter of the pintle lunette/ring shank so I can match it?
    Cheers,
    Dave

  2. #2
    Join Date
    May 2007
    Location
    Denmark WA
    Posts
    668
    Total Downloaded
    0
    I can see in some AULRO pics it has a shank with a step down- wanting the outside of the shank diameter where it is large and the total length from the ‘face’ at the rear of the ring to the shank end (overall not just the large part).
    Cheers,
    Dave

  3. #3
    Join Date
    May 2007
    Location
    Denmark WA
    Posts
    668
    Total Downloaded
    0
    Bought one!
    Shaft is 1.5” through housing. Thread is stepped down to 1”. Shaft and thread about 4.5”s. Various washers and lock/unlock thingy on shaft. Bolt holes for drawbar are 5/16 (could be mistaken).
    Dave

  4. #4
    Join Date
    Aug 2007
    Posts
    1,479
    Total Downloaded
    0
    The mounting bolts should be 3/8 UNF

    Aaron

  5. #5
    Join Date
    May 2007
    Location
    Denmark WA
    Posts
    668
    Total Downloaded
    0
    You are correct! Cheers Dave

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!