Well couldn't find much searching , and no replies as yet , so I decided to pull the tow ring off and have a look for myself.
20200121_153002.jpg20200121_153020.jpg20200121_154612.jpg20200121_160137.jpg20200121_163733.jpg20200121_163831.jpg20200121_163842.jpg
So I undone the 4 bolts which hold it on ,lift the ring and the whole piece comes out thru the front. pics 1 & 2
Pic 3 shows the square block that stops the ring rotating.
Pic 4 , I just trimmed off the bottom corners of the block - came up 10mm & in 10mmboth sides and cut with a knife disc on the grinder
pics 5,6,7 - show it bolted back on with about 30 degrees rotation each way, and a view of the block looking down.
Took less than 1 hour to do .
Cheers Bulletman
Bookmarks