Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Perentie 6x6 LT95 Gear box

  1. #11
    Join Date
    Jul 2016
    Location
    Auckland NZ
    Posts
    21
    Yes thanks mate, must of been wrong since build as I saw you mention in another post that you had found the shaft bolt not at correct torque on a few boxes. Well my box had the biggest shim. So I would say that there were a lot of boxes but together with the thickest shim and then torqued as tight as the gears would allow instead of getting new shims made up. Runs a dream now, would pay for everyone to take top cover off and tighten shaft bolt if it's below spec as everything would of worn a little since new build and maybe causing it to jump out of high range, mine would push out every time in reverse. Runs like new now.

    On a side note are the Cab sills on the Perentie 6x6 able to be replaced from another Land Rover model, mine were missing from the start? Cheers

  2. #12
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    3,947
    Quote Originally Posted by PerentieNZ View Post
    Yes thanks mate, must of been wrong since build as I saw you mention in another post that you had found the shaft bolt not at correct torque on a few boxes. Well my box had the biggest shim. So I would say that there were a lot of boxes but together with the thickest shim and then torqued as tight as the gears would allow instead of getting new shims made up. Runs a dream now, would pay for everyone to take top cover off and tighten shaft bolt if it's below spec as everything would of worn a little since new build and maybe causing it to jump out of high range, mine would push out every time in reverse. Runs like new now.

    On a side note are the Cab sills on the Perentie 6x6 able to be replaced from another Land Rover model, mine were missing from the start? Cheers
    Good to hear it's all working good now. Which are the sills you mean, the ones under the doors?
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)

  3. #13
    Join Date
    Jul 2016
    Location
    Auckland NZ
    Posts
    21
    Yes, was trying to find some secondhand ones or new from a non military version that would fit, are they Series or defender sills on the Perentie?

  4. #14
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    3,947
    Quote Originally Posted by PerentieNZ View Post
    Yes, was trying to find some secondhand ones or new from a non military version that would fit, are they Series or defender sills on the Perentie?
    Neither, I haven't seen them on any other vehicle. Must have been sourced locally I reckon.
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!