Results 1 to 5 of 5

Thread: Hitch pin for rear of No5 trailer

  1. #1
    Join Date
    May 2007
    Location
    Denmark WA
    Posts
    668
    Total Downloaded
    0

    Hitch pin for rear of No5 trailer

    Hi all. After pics of a rear hitch pin for a No5 trailer. Or better still a hitch pin itself! Any links appreciated!
    Cheers,
    Dave

  2. #2
    Join Date
    Oct 2003
    Location
    Godwin Beach Qld
    Posts
    8,688
    Total Downloaded
    0
    G,day davros,

    I assume you are referring to the pin for the "duckbill" if so,from memory it is a 1lnch pin as used on tractor draw bars,they had a hole drilled in the lower end for a split pin or an"R"clip on a light chain or wire,as I said long time ago,close to 50 years, hope that is of some help,what is your planned tow vehicle? as any speed over 80kph with tyre pressure above 25 psi will give a tendency for an empty trailer to flip,saw this regularly on the Bruce Hwy when the Perentie first came into use,as S11a -S111 flat out at about 80k klicks the pin had a loop welded on the top as a hand hold for wet muddy conditions or at night,remembering that the Army had 3 types of drivers,"drivers,drovers,and steering wheel attendants"


    cheers

  3. #3
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    Quote Originally Posted by UncleHo View Post
    G,day davros,

    I assume you are referring to the pin for the "duckbill" if so,from memory it is a 1lnch pin as used on tractor draw bars,they had a hole drilled in the lower end for a split pin or an"R"clip on a light chain or wire,as I said long time ago,close to 50 years, hope that is of some help,what is your planned tow vehicle? as any speed over 80kph with tyre pressure above 25 psi will give a tendency for an empty trailer to flip,saw this regularly on the Bruce Hwy when the Perentie first came into use,as S11a -S111 flat out at about 80k klicks the pin had a loop welded on the top as a hand hold for wet muddy conditions or at night,remembering that the Army had 3 types of drivers,"drivers,drovers,and steering wheel attendants"


    cheers
    HO, Ron Glanfield who ran McIntyre Transport when they were the principal road train operator on the Darwin run reckoned there were three classes of road train drivers, "operators, drivers, and aimers."
    URSUSMAJOR

  4. #4
    Join Date
    May 2007
    Location
    Denmark WA
    Posts
    668
    Total Downloaded
    0

    Thumbs up

    Quote Originally Posted by UncleHo View Post
    G,day davros,

    I assume you are referring to the pin for the "duckbill" if so,from memory it is a 1lnch pin as used on tractor draw bars,they had a hole drilled in the lower end for a split pin or an"R"clip on a light chain or wire,as I said long time ago,close to 50 years, hope that is of some help,what is your planned tow vehicle? as any speed over 80kph with tyre pressure above 25 psi will give a tendency for an empty trailer to flip,saw this regularly on the Bruce Hwy when the Perentie first came into use,as S11a -S111 flat out at about 80k klicks the pin had a loop welded on the top as a hand hold for wet muddy conditions or at night,remembering that the Army had 3 types of drivers,"drivers,drovers,and steering wheel attendants"


    cheers
    Yeah just more ‘completing’ the trailer than for use! Sounds very dodgy to tow at anything more than Bush-airstrip baggage tender speed!
    Got a 1” hitch for $11! That’s $11 with loop-handle, chain and pin etc. Place had a range of them. I’ll see if it fits and post result.

  5. #5
    Join Date
    May 2007
    Location
    Denmark WA
    Posts
    668
    Total Downloaded
    0

    Thumbs up

    Yep all fits great! So $12 well spent. May take out for pits inspection; could raise a few eyebrows!

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!