Hi mate
As you mentioned panels delivered cut to length
The only cutting I had to do on the Pavillion was removing the roof sheet overlap of the first sheet so essentially a 4m long 60mm wide strip of roof sheet cutoff
For that cut I used nibblers so as not to burn up the sheet using a cut disc .
Essentially cuts are the same as any Tin roofing work and just hack out the polystyrene as needed.
My gut says for a 6x4 cabin the SIP could make an excellent simple roof and either skillion span the 4 or 6m dimension or you could make up a nice gable with an exposed timber beam on centre supported by gable walls.
The panels are great for their spanning and insulation ability - you can easily cut in down lights
BUT for a walking system my thoughts would turn towards something that is
A/ easier to fit out internally
B/ not steel sheeting internal - for a roof ceiling the smooth steel in surfmist white is pretty innocuous - but as a wall finish it is pretty industrial!!!
Will the canon be slab on ground or on piers?
What is your preferred flooring ?
S
Bookmarks