Troy,
Fantastic work !!
I am going to talk to my mate who has a fabrication shop and see if we can get GNC laser cutter to do much of the work !
Will let all know how it goes
Steve
Printable View
Troy,
Fantastic work !!
I am going to talk to my mate who has a fabrication shop and see if we can get GNC laser cutter to do much of the work !
Will let all know how it goes
Steve
As mentioned elsewhere, I can now supply a set of drawings in PDF which shows how to fabricate the 'ranger danger' bar, with the hard work done by a shop with lazer cutting / plate folding capability.
The DXF file is contained within a .rar file in an earlier post of this thread.
The PDF drawings contain all the dimensions, fold lines and angles for somebody with welding skill to replicate what I have done.
There is a little bit of trial fitting needed, so it is not something that should be attacked as a production line approach.
This post has the details of the bits. The next post will have the assembly.
Troy N.
Attachment 79221
Attachment 79222
Attachment 79223
Attachment 79224
Note, these drawings need to be printed to colour A3 to work best.Attachment 79225
Attachment 79226
You've gone to a lot of trouble there mate! Really appreciate it!
Cheers
Keithy
I just hope other owners on the forum get some benefit. I've gotten a lot out of this forum so this is just my way of putting back in.
Just digging this up, I've got a boilermaker knocking up a rear bar for me on the second of August. It's not as detailed as your design Ranger D, and I apologise as it's not even going to come close to the sexy of yours - but it's within my price range and old mate has a solid reputation around town so I've gone with a custom design that'd probably suit someone with an X-rox front bar more than a regular bull bar.
Cheers
Keithy
There was / is one on ebay which didn't sell
[ame=http://www.ebay.com.au/itm/261529826610]Range Rover P38 Rear Custom Spare Wheel Carrier | eBay[/ame]
Steve
Isn't that a standard OEM bumper? With a wheel carrier bracket.
Yes on closer inspection it is a bracket and original bumper.Quote:
Originally Posted by davidsonsm
It failed to sell at 350 so he reilsted it for 450 ??
Steve
Jedi mind trick.Quote:
Originally Posted by SteveFarmer