Results 1 to 3 of 3

Thread: ABS Modulator 12 pin vs 13 pin

  1. #1
    Join Date
    May 2010
    Location
    Mindarie, Western Australia
    Posts
    1,141
    Total Downloaded
    0

    ABS Modulator 12 pin vs 13 pin

    Im in the process of changing my ABS Modulator on a 1996 HSE. I recently aquired a 1998 model in the belief that they are the same unit (ie GEMS prior to the Bosch 4 wheel traction control) but that appears to be not quite the case. My original 1996 unit has a 12 pin connector whereas the 1998 one has a 13 pin connector. (No pin number 3 on the 1996 unit) The plug on the wiring harness fits and even has a hole for the additional pin. I've had a look through the RAVE manual and do not see a change to the pin configuration on a 1998 ABS Modulator, only post 1999 do I see that the 12 wires go to different locations on the ABS ECU.

    Before I reconnect the battery, has anyone else stuck this before? I have installed the unit and am ready to go through the brake bleeding process.

    Gary

  2. #2
    Join Date
    Jun 2013
    Location
    Perth
    Posts
    5
    Total Downloaded
    0
    Hi Gary
    Did you have any luck getting it to work?

    Ben

  3. #3
    Join Date
    May 2010
    Location
    Mindarie, Western Australia
    Posts
    1,141
    Total Downloaded
    0
    Installed with no errors. Relieved and delighted with the result!

    Gary

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!