Page 3 of 12 FirstFirst 12345 ... LastLast
Results 21 to 30 of 111

Thread: P38 Suspension Lift Guide

  1. #21
    Join Date
    May 2010
    Location
    Mindarie, Western Australia
    Posts
    1,141
    Total Downloaded
    0
    Quote Originally Posted by davidsonsm View Post
    Can't see the picture gary. Not sure why?
    Not a picture, it's a .PDF

  2. #22
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    So your lift has reduced the caster from 4degs to circa one and a quarter. Assume that the alignment was done at standard height?

    If we could work out the bushing size of the radius arm, we'd probably be able to get some eccentric bushings to correct the caster.

  3. #23
    Join Date
    May 2010
    Location
    Mindarie, Western Australia
    Posts
    1,141
    Total Downloaded
    0
    Alignment was done at Highway height

    Gary

  4. #24
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    So at standard height it must be about neutral.

  5. #25
    Join Date
    Jan 2012
    Location
    Bendigo
    Posts
    1,643
    Total Downloaded
    0
    At standard height there's supposed to be 4 degrees. I can't see the pdf on the phone, but there's 0 degrees of camber.

    I've read somewhere you loose half a degree of castor for every inch of lift on a landrover. Though the p38 may have different length raduis arms. I know the rear radius arms are shorter than a d2.

  6. #26
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    Who's seen this. One solution. They look to have fitted TF145's but without the lift spacers. That rear bag was the most interesting aspect for me. Looks about ready to pop off.

    Flexible travel height sensor for Range Rover P38.:*http://youtu.be/reCet235Zi0

  7. #27
    Join Date
    Aug 2012
    Location
    Camden
    Posts
    680
    Total Downloaded
    0
    I saw that before. Exactly what I thought. Hate to see it with a wheel lifted.

    Gives me peace of mind with my teeny weeny 30mm spacers

    So you get increased articulation but at the risk of eventually popping that ring off...

  8. #28
    Join Date
    Aug 2012
    Location
    Camden
    Posts
    680
    Total Downloaded
    0
    Just commented to ask how his bags are after 10 months of install.

  9. #29
    Join Date
    May 2010
    Location
    Mindarie, Western Australia
    Posts
    1,141
    Total Downloaded
    0
    Quote Originally Posted by davidsonsm View Post
    Who's seen this. One solution. They look to have fitted TF145's but without the lift spacers. That rear bag was the most interesting aspect for me. Looks about ready to pop off.

    Flexible travel height sensor for Range Rover P38.:*Flexible travel height sensor for Range Rover P38. - YouTube
    Sean
    I think something was lost in translation with your question re the additional shock on the height sensor
    Gary

  10. #30
    Join Date
    Aug 2012
    Location
    Camden
    Posts
    680
    Total Downloaded
    0
    Quote Originally Posted by davidsonsm View Post
    Who's seen this. One solution. They look to have fitted TF145's but without the lift spacers. That rear bag was the most interesting aspect for me. Looks about ready to pop off.

    Flexible travel height sensor for Range Rover P38.:*Flexible travel height sensor for Range Rover P38. - YouTube
    Well the guy reckons he has tested them on many roads and the bags have survived. That lower clamp is really pulling tight hey.

    My comments on youtube were a little repetitive as I forgot what I previously wrote in the comments.. And I tried to sound positive for him, but that would really concern me seeing my bags doing that. But its working for him.

Page 3 of 12 FirstFirst 12345 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!