Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 51

Thread: P38 Aftermarket Tyre Size Guide

  1. #21
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    The rims are 2nd hand D2 so they have a 57mm offset (from memory) which matches my other 18" hurricanes.

    I have 50mm lift. The bump stops have been extended by about 35mm. No rubbing at standard height on lock. Not had time to check lower heights yet. Not had time to check on articulation.

  2. #22
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,580
    Total Downloaded
    0
    What height is your Rangie pictured in there?

    Can you confirm (one of these days) what your speedo reads at a GPS indicated 100km/h and what revs you are doing?

    Cheers

  3. #23
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    Keith, was that one aimed at me? If so, standard height. I've used a Truspeed to correct the speedo. Before the correction, on the 265/65/18's it's was a pretty accurate 8% over. From my playing around today in the 2nd setting on the Truspeed, the 33"ers seem to be 10% over.

  4. #24
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,580
    Total Downloaded
    0
    So roughly 90kmh on the speedo to 100kmh actual? Cheers mate!

    Yeah the height comment was for you!

  5. #25
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    When I.say over I mean the car was going faster than the speedo was reading. Bigger wheels not spinning as fast. So I.guess I really should say the.speedo was under.

  6. #26
    Join Date
    Aug 2012
    Location
    Camden
    Posts
    680
    Total Downloaded
    0
    Yeh my 32's pretty much meant 100km/h on the speedo was a true 110km/h when they were new... So I'd imagine a full 33 would likely be slightly over 10% when new yes? Like 12-13%.

  7. #27
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,580
    Total Downloaded
    0
    I bought two BFG KM2's in 285/75 today for $120! It's not a set, but with 80% tread I couldn't pass the offer up.

    I'll get 4 brand new in a month or so and use the 80%ers as spares until the new ones wear down. Still need to get a dual tyre carrier before I'll fit them up, so that's higher on the list.

    Cheers
    Keithy

  8. #28
    Join Date
    Aug 2012
    Location
    Camden
    Posts
    680
    Total Downloaded
    0
    Quote Originally Posted by Keithy P38 View Post
    I bought two BFG KM2's in 285/75 today for $120! It's not a set, but with 80% tread I couldn't pass the offer up.

    I'll get 4 brand new in a month or so and use the 80%ers as spares until the new ones wear down. Still need to get a dual tyre carrier before I'll fit them up, so that's higher on the list.

    Cheers
    Keithy
    Nice find Keith. That's a good score

  9. #29
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    I got my new BF Goodrich 285/75/16's from Cornell's in Sydney. $255 per corner. Delivered to a depot in Melbourne. Thought that was pretty good.

  10. #30
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    I was looking at 2x 2nd hand BF muddies in 285/75/16 at 70% for $300. So $120 sounds like a steal. Excellent find.

Page 3 of 6 FirstFirst 12345 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!