Can't fix the cruise control

Quote:

---

Originally Posted by clubagreenie

Did you use rubber or silicon hose?

---

I just bought std vacuum hose from supercheap however when I placed side by side with oem hose I did notice significant difference in wall thickness.
OEM stuff is definitely thinner.

That's exactly what this forum all about Phantom,the collective mind
My mechanic and previous owner kept banging on ( in good faith I'll add) that it was the electrical controller under the dash that was faulty and after replacing three of them (them not me so an inherited problem )the system still didn't function so I'll try this on the weekend and hopefully get the cc going for the up and coming trip to croagingalong NP Like u I replaced hoses at bellows to no effect so thanks for that
Bp38

Quote:

---

Originally Posted by SteveFarmer

Hi

Here is a pic of the way mine is connected and a pic from RAVE

Also do you have a copy of RAVE?

Steve

---

I notice that there are two hoses coming from the bottom of the bellows. Where does the the bottom hose of the two go, i cant seem to find where it connects.

HI

If you look at the diagram I posted then it is pretty clear.

My bellows has one outlet and the tube loops from that to the vacuum pump. Just before the vacuum pump there is a T piece and the branch from there looks like it goes to the stuff in the drivers dash area

Steve

Quote:

---

Originally Posted by derpomz

I notice that there are two hoses coming from the bottom of the bellows. Where does the the bottom hose of the two go, i cant seem to find where it connects.

---

Hi derpomz,
how did you get on? is it sorted now & what did you find, it may just help someone else!

I have changed the Cruise Control bellows and put new hoses on them. I now have the light on the dash working but the controls on the steering wheel dont seem to be working.

Any help in this regard would be grateful, im having trouble understanding RAVE in this regard. Is something missing or is there a relay i should know about.

Threads merged.


The bellows & hoses have no bearing on the light operation in the switch.
The light can be intermittent due to bad contacts or it could be something else but it's definitely nothing to do with your actuator (bellows) or hoses.