Results 1 to 10 of 10

Thread: air suspension

  1. 11th October 2015, 05:18 PM #1
    ken horn Guest

    air suspension

    my p38 will not pump up
    air bags do not leak, compressor is fine, air tank holds air
    any suggestions
    Thanks
    Ken
    Reply With Quote Reply With Quote
  2. 11th October 2015, 05:34 PM #2
    Keithy P38's Avatar
    Keithy P38
    Keithy P38 is offline AT REST
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    Could you be more specific? Are you saying that the compressor runs and fills the tank, you've checked for leaks and there are none, yet your P38 fails to raise?

    If so, I'd first be checking that the doors are all closed, you don't have a faulty brake light switch, you don't have your foot on the brakes, and then I'd be looking at deeper options once those boxes are ticked.

    Cheers
    Keithy
    Reply With Quote Reply With Quote
  3. 11th October 2015, 06:02 PM #3
    ken horn Guest
    yes that's correct
    doors are closed, eas fault light is on
    Reply With Quote Reply With Quote
  4. 11th October 2015, 07:28 PM #4
    Keithy P38's Avatar
    Keithy P38
    Keithy P38 is offline AT REST
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    That'd do it every time! Do you have access to diagnostic gear at all? I'm sure it'd point straight to the issue. Could be any number of things.
    Reply With Quote Reply With Quote
  5. 11th October 2015, 07:41 PM #5
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    There's quite a few members on here with the gear to help you work out what's wrong.


    Where in NSW are you Ken?
    Scott
    Reply With Quote Reply With Quote
  6. 11th October 2015, 08:45 PM #6
    ken horn Guest
    Morisset 2264
    Reply With Quote Reply With Quote
  7. 11th October 2015, 08:47 PM #7
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Other than a workshop, hopefully The Tree will see this as he's about the closest to you that I know of.
    Scott
    Reply With Quote Reply With Quote
  8. 13th October 2015, 08:51 AM #8
    TheTree
    TheTree is offline ChatterBox
    Join Date
    Feb 2013
    Location
    Gosford, NSW, Australia
    Posts
    2,556
    Total Downloaded
    0
    Hi

    I am at West Gosford and have a GEMS nanocom if that's any help

    Your other option is to get Storey Wilsons EAS Suite software

    Steve
    Reply With Quote Reply With Quote
  9. 13th October 2015, 05:06 PM #9
    finallyrangie's Avatar
    finallyrangie
    finallyrangie is offline Master Supporter
    Join Date
    Jan 2011
    Location
    Burpengary, QLD
    Posts
    620
    Total Downloaded
    0
    X2 for the storey Wilson unlock suite it has dug me out of the messy stuff a number of times
    Reply With Quote Reply With Quote
  10. 13th October 2015, 06:27 PM #10
    mechanic2you
    mechanic2you is offline Fossicker
    Join Date
    Aug 2009
    Location
    Woonona
    Posts
    66
    Total Downloaded
    0
    Hi


    Is the lights on the eas switch rolling
    If not try jacking the body up a little as the bump stops may have collapsed a little too much
    Regards
    Reply With Quote Reply With Quote
« Who bought my P38 DSE | are sway bar disconnects legal in Qld »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!