Mate
The only other option I know of is to contact Lee and lab electronics in Mittagong
Labtronx Home
You would most likely have to send him the BECM and KeyFobs for him to do the job.
Steve
Printable View
Mate
The only other option I know of is to contact Lee and lab electronics in Mittagong
Labtronx Home
You would most likely have to send him the BECM and KeyFobs for him to do the job.
Steve
if you send me the bottom (security) board from the becm or whole becm I can unlock it and get it back to working normally.
Thanks Rupert.
However, is there are deeper problem lurking since I cannot 'start communication with ECU' (BECM) according to my Nanocom Evo? Is this due to it being 'locked'?
Similar Nanocom communication problem on my D2 was solved by unplugging SLABS ECU from the bus. Maybe this is a variant of the same problem.
TIA
Steve
the becm has always been easy to spike, but now they are old, just about any deviation from battery voltage can upset them.
All fixed now. Many thanks to Rupert for unlocking the logic board of BECM. Must look at a transient suppressor of some sort if this is a vulnerability of the BECM.
Steve