yea but!
those headers are custom made out of maybe 1.5mm pipe,, a stiff breeze would hurt them,,,
I doubt any wrap will damage a cast iron product,,
That is excellent news!
Any chance of some pics? I would also like to know how it keeps up since there is still the concern of the metal corroding much faster. Keep us posted if you will
Thanks,
-P
PS I found an article that voices concern about wrapping: Exhaust Header Heat Wraps - Do Not Use
yea but!
those headers are custom made out of maybe 1.5mm pipe,, a stiff breeze would hurt them,,,
I doubt any wrap will damage a cast iron product,,
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
I had a couple of the rivnuts tear out of the heat shields. I bought some brass nuts and bolts to replace them.
Years ago, manifold nuts were always brass.
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Well finally got it to make a noise today
Had an eye op 3 weeks ago so still only got about 50% vision in that eye, so its been painfully slow putting it back together by feel. Son inlaw come down today to help finish it off.
May still have a bit of air in the system but the old girl started after turning over 3 or 4 times on the jump leads. Do an oil change tomorrow and hopefully back on the road.
cheers
blaze
ps
once again thanks to roverlord off road spare, no doubt we will do business again
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks