Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Air Susp lift spacers

  1. #1
    Join Date
    Mar 2015
    Location
    Townsville at the moment
    Posts
    21

    Air Susp lift spacers

    Is there anyone who currently makes a lift kit or just the spaces. If someone would like to make me a set I will gladly pay a reasonable price for them.
    I have a new set of ride height sensors ready for modification have fitted Gen 3's and Terrafirma 144/145 shocks just need the spacers now.
    Regards
    JB
    0477804997

  2. #2
    Join Date
    Jul 2011
    Location
    burpengary
    Posts
    80
    There's a p38 lift kit on eBay for $160 ish if that's what you're after. 2 inch I think.

  3. #3
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    1,901
    Quote Originally Posted by JohnnyB View Post
    Is there anyone who currently makes a lift kit or just the spaces. If someone would like to make me a set I will gladly pay a reasonable price for them.
    I have a new set of ride height sensors ready for modification have fitted Gen 3's and Terrafirma 144/145 shocks just need the spacers now.
    Regards
    JB
    0477804997

    I'm assuming you have already seen keithy p38's comprehensive post on this very subject?
    P38 Suspension Lift Guide
    Dan - MY04 D2a TD5 auto Classic (2nd engine @ 153K) set up for touring
    Bessie - MY95 RRC LSE Vogue SoftDash with MY99 TD5 and 4HP24 transplant

  4. #4
    Join Date
    Mar 2015
    Location
    Townsville at the moment
    Posts
    21

    Lift kits

    Quote Originally Posted by gavinwibrow View Post
    I'm assuming you have already seen keithy p38's comprehensive post on this very subject?
    P38 Suspension Lift Guide
    Yes I have and a very good one it is too

  5. #5
    Join Date
    Jan 2016
    Location
    Netherlands
    Posts
    138
    there is someone on this forum who has started production on a copy of the original hardrange lift kits. I actually have one of the very first I am installing right now. Perhaps that is what you're looking for?

    Cheers
    -P

  6. #6
    Join Date
    May 2010
    Location
    Mullaloo, Western Australia
    Posts
    1,087
    Quote Originally Posted by prelude View Post
    there is someone on this forum who has started production on a copy of the original hardrange lift kits. I actually have one of the very first I am installing right now. Perhaps that is what you're looking for?

    Cheers
    -P
    Dave at British Car Components is the gentleman who is now producing the HRA derived kits. You will find him with the username of BritishCarComponents on this site
    Gary

    1996 p38a HSE
    2" lift, Gen3 bags, adjustable Terra Firma +2" shocks, adjustable panhard rod, adjustable sway bar disconnects, EAS bypass, Ashcroft ATB F&R, 255/55/18 Toyo Proxes ST for road & 265/75/16 Maxxis Big Horns for off road :)

  7. #7
    Join Date
    Mar 2015
    Location
    Townsville at the moment
    Posts
    21

    British Car Components

    Quote Originally Posted by mtb_gary View Post
    Dave at British Car Components is the gentleman who is now producing the HRA derived kits. You will find him with the username of BritishCarComponents on this site
    Thanks Gary

  8. #8
    Join Date
    Mar 2015
    Location
    Townsville at the moment
    Posts
    21

    British Car Components

    Ordered a 2" suspension lift kit yesterday, will post some pics when it arrives.

  9. #9
    Join Date
    Mar 2015
    Location
    Townsville at the moment
    Posts
    21

    British Car Components 2'' lift kit

    Kit has arrived, does anyone have any installation instructions for this kit.DSCF0231.jpg

  10. #10
    Join Date
    May 2010
    Location
    Mullaloo, Western Australia
    Posts
    1,087
    I'm surprised no instructions???

    The top 2 large rectangles mount on the top of the rear axle (thin edge to the front) and provide new mounting holes for the bottom of the air springs. The two large circular metal pieces pictured with the red front extended bump stops inside them mount on top of the front air springs. To fit them you will need to remove the front air springs lock each one in place from where the spring was removed then refit the air spring. The bump stops are a straight swap for your existing ones. The "Z" shapes brackets are to reposition the front brake lines a bit further out from the chassis and also further downward (net effect is to use all of the unused brake line rather than getting extended brake lines. As for the other bits?

    You will also need to extend the height sensors.

    Have a look back through the articles on lifting on EAS there are quite a few pictures and comments that may also assist.

    Did you get extended shock absorbers?

    Good luck and let us know how you progress
    Gary

    1996 p38a HSE
    2" lift, Gen3 bags, adjustable Terra Firma +2" shocks, adjustable panhard rod, adjustable sway bar disconnects, EAS bypass, Ashcroft ATB F&R, 255/55/18 Toyo Proxes ST for road & 265/75/16 Maxxis Big Horns for off road :)

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!