-
18th May 2018, 12:53 PM
#11
But wouldn't posters feel more confident if they use an ATF actually approved by ZF in preference to an ATF that an oil blender claims is OK for a ZF transmission.
Call me old fashioned but that is what I think.
Regards Philip A
-
21st May 2018, 06:37 PM
#12
So it is, I'm not sure why I was told this then.
I found this interesting, and this maybe what you are after Phillip.
The hp22/24 is listed in TE-ML 11.
Lubricants and List of Lubricants - ZF Aftermarket
-
22nd May 2018, 07:43 AM
#13
So for the HP22 and HP24 it says ...
Automatic Transmission Fluid (ATF) according to lubricant classes 11A / 11B=> Refer to the following pages for approved commercial products
or
Automatic Transmission Fluid
(ATF) based on mineral base fluids according to former Dexron-II / Dexron-III specification by General Motors.
=> without listing
So that says any mineral based DXIII fluid is OK
Penrite has this page Product Recommendations | Penrite Oil
They list straight DX111 and ATF MHP semi syn as the recommended fluids.
So the message that the full syn is OK is not exactly in line with the recommendations from Penrite
Steve
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks