I saw one at my local shopping centre - I have a pic if I can find it.
If you have a copy of RAVE, look at the Accessory Fitting Instructions. Here are a couple of pages from it:
STC7878.JPG
STC7878-5.jpg
IMG_2137.PNGIMG_2138.PNGIMG_2139.PNGIMG_2140.PNG
I have a 99 p38 and found a range rover brocure from the same year. It has all the extra options u could order.
Including the factory winch cradle. If only u could still order .
Does anyone have one ,seen one ?
My question is .... how was it mounted to the chassis?? im imaging the 2 bolts on both chassis rails behind the crush cans . posts on here say these have failed as a spot to mount a recovery point . ie there to close to the end of the chassis rail and have pulled through. so did they use these bolt holes for the winch cradle??
Paul
I saw one at my local shopping centre - I have a pic if I can find it.
If you have a copy of RAVE, look at the Accessory Fitting Instructions. Here are a couple of pages from it:
STC7878.JPG
STC7878-5.jpg
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
yeah sweet thanx .
what is rave?? looks awsome .....can u scan the next page ?
so the 10mm bolts get changed to 12mm and there is a few brackets that get bolted on .
Rave is the PDF version of the workshop manual
You can grab a copy from the first link on this page
Range Rover Projects and Information
Steve
Rover (I think) Aftersales Viewing Environment
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks