Results 1 to 7 of 7

Thread: Removal of D pillars

  1. #1
    Join Date
    Aug 2006
    Posts
    629
    Total Downloaded
    0

    Removal of D pillars

    I cant remove the D pillar covers to respray. Screws all out, pulled hard to the point of not wanting to break them. Any ideas?

  2. #2
    Join Date
    Feb 2013
    Location
    Gosford, NSW, Australia
    Posts
    2,556
    Total Downloaded
    0
    I just used some trim removal tools to loosen the clips which hold it on

    Steve

  3. #3
    Join Date
    Jan 2016
    Location
    Netherlands
    Posts
    880
    Total Downloaded
    0
    I got them out recently. IIRC pull at the top and slide them out upwards but I'll have a look when I get home. The old plastic does break a lot though, no matter how careful you are at times.

    -P

  4. #4
    Join Date
    Aug 2006
    Posts
    629
    Total Downloaded
    0
    Ok thanks, ill try to pull upwards and see what happens.

  5. #5
    Join Date
    Jan 2016
    Location
    Netherlands
    Posts
    880
    Total Downloaded
    0
    Hi mate, look at the image below. You need to remove the rubber lining first, shove a breakerbar or flat piece of wood in and possible twist it to release the clips on the window end. Once you have done that just pull upwards and out.

    Cheers!
    -P
    IMG_3552.jpg

  6. #6
    Join Date
    Aug 2006
    Posts
    629
    Total Downloaded
    0
    Quote Originally Posted by prelude View Post
    Hi mate, look at the image below. You need to remove the rubber lining first, shove a breakerbar or flat piece of wood in and possible twist it to release the clips on the window end. Once you have done that just pull upwards and out.

    Cheers!
    -P
    IMG_3552.jpg
    Thanks heaps thats my weekend job

  7. #7
    Join Date
    Aug 2006
    Posts
    629
    Total Downloaded
    0
    Quote Originally Posted by prelude View Post
    Hi mate, look at the image below. You need to remove the rubber lining first, shove a breakerbar or flat piece of wood in and possible twist it to release the clips on the window end. Once you have done that just pull upwards and out.

    Cheers!
    -P
    IMG_3552.jpg
    Thanks got them off, very tough job, got them sprayed up and looking perfect

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!