Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: P38 Adjustable Panhard rods

  1. #1
    Join Date
    Feb 2010
    Location
    3029 Melbourne
    Posts
    610
    Total Downloaded
    0

    P38 Adjustable Panhard rods

    Hi all,
    A while back I purchased a panhard rod adjuster to modify my rear bar as I have 2" lift plus Arnott GenIII bags allround.
    I am about to install full nolathane bush kit & new Terrafirma adjustable +2" shocks so is perfect time to install adjuster to panhard bar;
    However I could not find one for front t time I bought rear.
    Can anyone advise if they know where I can get front adjuster or complete front adjustable bar!
    Looking to get all this done over chrissy break ready for outings in early part of 22.
    ps Ive recently fitted all new height sensors, ball joints, cv's & rear wheel bearings so it should feel brand new when im done!

  2. #2
    Join Date
    Jun 2020
    Location
    Rockhampton, central Queensland
    Posts
    131
    Total Downloaded
    0

    : P38 Adjustable Panhard rods

    Hi Fantom,
    would it be the same as the one for the rear? What year is your P38, and where did you get the height sensors, as I need a set for my P38. I have to get my finger out and get some work done on mine, as I was planning on going to Cape York and Fraser Island next year. My list is rather longer than yours though. So I better get started, but first I have to sort this rough running motor when cold.
    Regards,
    Alan

  3. #3
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,309
    Total Downloaded
    0
    Quote Originally Posted by FANTOM P38 View Post
    Hi all,
    A while back I purchased a panhard rod adjuster to modify my rear bar as I have 2" lift plus Arnott GenIII bags allround.
    I am about to install full nolathane bush kit & new Terrafirma adjustable +2" shocks so is perfect time to install adjuster to panhard bar;
    However I could not find one for front t time I bought rear.
    Can anyone advise if they know where I can get front adjuster or complete front adjustable bar!
    Looking to get all this done over chrissy break ready for outings in early part of 22.
    ps Ive recently fitted all new height sensors, ball joints, cv's & rear wheel bearings so it should feel brand new when im done!
    If you're doing poly bushes then Superpro is the ONLY way to go. I'll say no more.

    DL

  4. #4
    Join Date
    Jan 2016
    Location
    Netherlands
    Posts
    874
    Total Downloaded
    0
    "funny" this, I got mine as a DIY kit from fleabay from... ausrtralia I'd reckon you'd be able to find them over there? I checked my mail history and this was the listing back then:

    Range Rover P38, Land Rover L318 Adjustable Panhard Rod Track Rod DIY Kit

    I don't think they are on anymore but maybe this will give you some pointers for googling.

    -P

  5. #5
    Join Date
    Feb 2010
    Location
    3029 Melbourne
    Posts
    610
    Total Downloaded
    0
    Bought mine from eBay also.
    But he’s not doing them anymore.

  6. #6
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,580
    Total Downloaded
    0
    I’m still running the standard Panhard rods on mine. It’s a happy camper! How’s your experience been mate?

    Cheers
    Keithy

    2002 P38 Range Rover HSE

    Sequential LPG - Redarc Charger - TPMS - Ashcroft Locker
    Wheel Carrier - Bullbar & Spotlights - 285/75/16 BFG KM3’s
    On Board Solar - Stainless Snorkel - 2” Suspension Lift

  7. #7
    Join Date
    Sep 2012
    Location
    Perth Australia
    Posts
    323
    Total Downloaded
    0
    How hard was it to do the ball joints,? Mine look shot. When I’m driving over rough Bitumen she’s all over the place.

  8. #8
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,580
    Total Downloaded
    0
    Not extremely, if I remember correctly. I’m pretty sure mine only took an hour or so each to do.

    Don’t quote me on that - I’ve had a rough trot with the noggin lately.

    Cheers
    Keithy

    2002 P38 Range Rover HSE

    Sequential LPG - Redarc Charger - TPMS - Ashcroft Locker
    Wheel Carrier - Bullbar & Spotlights - 285/75/16 BFG KM3’s
    On Board Solar - Stainless Snorkel - 2” Suspension Lift

  9. #9
    Join Date
    Sep 2012
    Location
    Perth Australia
    Posts
    323
    Total Downloaded
    0
    Thanks Mate

    As long as i dont need to use my Noggin to get them loose.

  10. #10
    Join Date
    Feb 2010
    Location
    3029 Melbourne
    Posts
    610
    Total Downloaded
    0
    Quote Originally Posted by Keithy P38 View Post
    I’m still running the standard Panhard rods on mine. It’s a happy camper! How’s your experience been mate?

    Cheers
    Keithy
    Hi mate not been on here much since covid but glad to hear you’re on the mend keep spirits up it’s amazing what docs can do these days.
    I haven’t fitted rear adjuster yet as I was hoping to find one for front so could do both at same time.
    I’m also looking at changing my 33” Km2’s to possibly MAxxis mt772 anyone have comments on these tyres? Seem to have good reviews, not much of price difference!

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!