Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Auto Problem!

  1. 8th September 2009, 01:50 PM #1
    M.Allison's Avatar
    M.Allison
    M.Allison is offline Fossicker Gold Subscriber
    Join Date
    Aug 2009
    Location
    Croydon Vic
    Posts
    92
    Total Downloaded
    0

    Exclamation Auto Problem!

    Hey Guys,

    Im having a major problem with my auto! i drive an HSE.

    Everytime i put it in to drive and go to drive it stays in first and wont change up.

    The neutral light is on even tho its in drive...also when i put it into third it lights up reverse and i dont wanna push it because it feels like its conflicting....i have fluid in the gear box and its always run fine until now never had an issue except for the occasional "Gear Box Fault" which then it starts to change really harsh but when i switch it off and back on it runs fine again...

    i started it this morning and it seemed to run ok and then i was driving on the highway and it started doing it again...

    please help.

    Thanks guys,

    Mike
    Reply With Quote Reply With Quote
  2. 8th September 2009, 04:04 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,501
    Total Downloaded
    0
    when was it last serviced and whats the fluid like?
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 8th September 2009, 09:11 PM #3
    M.Allison's Avatar
    M.Allison
    M.Allison is offline Fossicker Gold Subscriber
    Join Date
    Aug 2009
    Location
    Croydon Vic
    Posts
    92
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    when was it last serviced and whats the fluid like?
    the fluid is fine i serviced it about 15000 ago.

    mike
    Reply With Quote Reply With Quote
  4. 8th September 2009, 09:30 PM #4
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    What's the battery voltage like? I know the D2 is very susceptible to voltage but I can't say I've seen a problem like that in the RR.

    i have seen the odd gearbox ECU replaced over the years but it's not a common failure point. I wonder if your inhibitor switch has died, hence the strange gear selection lights.
    Scott
    Reply With Quote Reply With Quote
  5. 8th September 2009, 10:07 PM #5
    mike 90 RR Guest
    I don't know the answer to your problem ... but your "incorrect sequence" of "selector light" error made me think of the below suggestion that I lifted off another site .....

    "Gearbox Fault" Message

    One interesting incident I experienced was the appearance of the "gearbox fault" message every time I went round a sharp right hand curve. The problem eventually proved to be a loose connector in a part of the harness that connects to the electronically controlled transmission. I have since heard from several other owners with the "Gearbox Fault" message. It apparently indicates that voltage to the transmission selector mechanism is insufficient. Another cause is failure of the transfer box ECU to communicate with the BeCM due to a bad connection or connector.

    .... So loose or dry connectors???

    Mike
    Reply With Quote Reply With Quote
  6. 8th September 2009, 10:19 PM #6
    PaulP38a's Avatar
    PaulP38a
    PaulP38a is offline Wizard Gold Subscriber
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    As others have mentioned, sounds like it might be a connector issue. You've also mentioned that you like to play offroad a bit... maybe it's time for a clean-up and check underneath?

    Give the transmission housing a good clean with a light hosing and scrubbing brush (make sure ignition is off). Check the connectors to the selector box on the side of the transmission housing and give the whole area a good spray of WD-40. maybe, just maybe...

    Just for kicks, check that the EAT-ECU under the passenger's seat is dry and clean-ish.

    Cheers, Paul.
    My toys, projects and write-ups at PaulP38a.com
    Reply With Quote Reply With Quote
  7. 9th September 2009, 12:26 AM #7
    andrew e
    andrew e is offline Wizard
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    is it leaking oil out the breather (located behind the eas), if so it is an internal fault with the clutches, and a rebuild/replacement is needed. theres a good one on ebay ATM.
    Andy
    Reply With Quote Reply With Quote
  8. 9th September 2009, 12:31 AM #8
    PaulP38a's Avatar
    PaulP38a
    PaulP38a is offline Wizard Gold Subscriber
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    Quote Originally Posted by andrew e View Post
    theres a good one on ebay ATM.
    Not that SoB guy by any chance?
    My toys, projects and write-ups at PaulP38a.com
    Reply With Quote Reply With Quote
  9. 9th September 2009, 11:25 AM #9
    M.Allison's Avatar
    M.Allison
    M.Allison is offline Fossicker Gold Subscriber
    Join Date
    Aug 2009
    Location
    Croydon Vic
    Posts
    92
    Total Downloaded
    0
    Quote Originally Posted by andrew e View Post
    is it leaking oil out the breather (located behind the eas), if so it is an internal fault with the clutches, and a rebuild/replacement is needed. theres a good one on ebay ATM.
    Andy
    lol na im good. the gear box was rebuilt only 80 thousand ago so its fine lol. there is no oil leaking outta the breather however i did notice a very small leak coming from the line going into the gearbox sump.

    i fixed that up and i drained all the oil and put fresh stuff in and it seems to be fixed

    ill keep you guys posted if it happens again.

    p.s i noticed it lost alot of tranny fluid when i went 4wding anyone got any suggestions?
    Reply With Quote Reply With Quote
  10. 9th September 2009, 10:33 PM #10
    andrew e
    andrew e is offline Wizard
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    where did you lose it from? It is quite common mechanics inadvertantly over fill them.
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« P38A Upgrade - Advice sought | Air Compressor »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!