Page 2 of 7 FirstFirst 1234 ... LastLast
Results 11 to 20 of 69

Thread: Water in passenger footwell

  1. #11
    Join Date
    Mar 2009
    Location
    Melton West, Victoria
    Posts
    363
    Total Downloaded
    0
    Quote Originally Posted by PaulP38a View Post
    If you pop out your LHS pollen filter so you can see down to the blower, and set the HVAC to recirc, does your flap close?
    Just went out and had a look. My recirc flap is working and the flap closed as it should.

  2. #12
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    paul, the p38 doesnt have a centre blower motor, just the one on each side.

    Are you sure your 'duck bum' drain doesnt have a split on the concentina? i have seen this before when i have ripped them apart.

  3. #13
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    Quote Originally Posted by andrew e View Post
    paul, the p38 doesnt have a centre blower motor, just the one on each side.

    Are you sure your 'duck bum' drain doesnt have a split on the concentina? i have seen this before when i have ripped them apart.
    doh! of course it was the RHS blowing aginst the LHS.

    No obvious splits that I can see.

    Unfortunately, I haven't had much of a look at it today... been distracted by getting a certain web site relocated to a new host and all the "fun" associated with that

    Cheers, Paul.
    My toys, projects and write-ups at PaulP38a.com

  4. #14
    Join Date
    Nov 2006
    Location
    narellan, sydney
    Posts
    1,131
    Total Downloaded
    0
    Quote Originally Posted by PaulP38a View Post

    Unfortunately, I haven't had much of a look at it today... been distracted by getting a certain web site relocated to a new host and all the "fun" associated with that

    Cheers, Paul.
    looks good so far too. All that server host stuff is mumbo jumbo to me, give me a 5 inch angle grinder, and mig welder any day.

    Andy

  5. #15
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    Quote Originally Posted by Junosi View Post
    Just went out and had a look. My recirc flap is working and the flap closed as it should.
    Well, there goes that theory. I'll keep scratching 'me head...
    My toys, projects and write-ups at PaulP38a.com

  6. #16
    Join Date
    Jan 2008
    Location
    Medowie, Port Stephens and Sydney
    Posts
    251
    Total Downloaded
    0
    I'm getting a leak in both footwells after rain and car wash - guessing this is most likely a windscreen seal issue? The seals do look old, just not sure which zebra i should be chasing first.

  7. #17
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Quote Originally Posted by LavisLane View Post
    I'm getting a leak in both footwells after rain and car wash - guessing this is most likely a windscreen seal issue? The seals do look old, just not sure which zebra i should be chasing first.
    Whip out your pollen filters after rain & see if there's water sitting in there. I had water dripping from the RH side & ended up stripping the intake system apart & resealing it all. It hasn't leaked since & last week's rain was a good test for it.
    Scott

  8. #18
    Join Date
    Jul 2008
    Location
    Geelong Victoria
    Posts
    940
    Total Downloaded
    0
    Quote Originally Posted by PaulP38a View Post
    doh! of course it was the RHS blowing aginst the LHS.

    No obvious splits that I can see.

    Unfortunately, I haven't had much of a look at it today... been distracted by getting a certain web site relocated to a new host and all the "fun" associated with that

    Cheers, Paul.
    Its a proper PITA job! I hate that sort of work. Web site development, on the other hand ... there's some satisfaction in that!

    Willem

  9. #19
    Join Date
    Jul 2008
    Location
    Geelong Victoria
    Posts
    940
    Total Downloaded
    0
    Quote Originally Posted by PaulP38a View Post
    Well, there goes that theory. I'll keep scratching 'me head...

    Careful ... you'll get splinters in your fingers!

    Willem

  10. #20
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    Quote Originally Posted by willem View Post
    Its a proper PITA job! I hate that sort of work. Web site development, on the other hand ... there's some satisfaction in that!

    Willem
    another doh! I forgot to send you money yesterday... doing it now

    Hoping to get back to that water problem this weekend, after Andy and I visit the Queanbeyan 4WD Spectacular in the Hard Rangie with new go-fast stickers on it
    My toys, projects and write-ups at PaulP38a.com

Page 2 of 7 FirstFirst 1234 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!