Results 1 to 3 of 3

Thread: Stuck bearing on shaft wanted.

  1. 31st October 2010, 06:45 PM #1
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0

    Stuck bearing on shaft wanted.

    For one of my next tutorials I need a half shaft or stub axle that has a bearing stuck on it.. (or has a bearing retaining collar)

    I intend to demonstrate the correct grinding and cold chiseling technique to remove the bearing from the shaft, you'll get the shaft back in one piece but the bearing/collar will be destroyed in the process.

    IF anyone in the brissy area has one I can see about coming to pick it up.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  2. 31st October 2010, 08:35 PM #2
    Killer's Avatar
    Killer
    Killer is offline Wizard Gold Subscriber
    Join Date
    Jan 1970
    Location
    Ipswich QLD.
    Posts
    1,784
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    For one of my next tutorials I need a half shaft or stub axle that has a bearing stuck on it.. (or has a bearing retaining collar)

    I intend to demonstrate the correct grinding and cold chiseling technique to remove the bearing from the shaft, you'll get the shaft back in one piece but the bearing/collar will be destroyed in the process.

    IF anyone in the brissy area has one I can see about coming to pick it up.
    Missed the boat with Scallops half shafts didn't you.

    Cheers, Mick.
    1968 SIIa SWB
    1978 SIII Game SWB
    2002 130 Crew Cab HCPU
    Reply With Quote Reply With Quote
  3. 31st October 2010, 08:44 PM #3
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    no, when we were doing that one we were trying to save the collar or I would have had it off with the die grinder.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« Spare wheel carrier on bonnet for bigger tyres. | Finished scrubbies/steps (130) »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!