Very good Mark. I will watch this thread with interest.
Printable View
Very good Mark. I will watch this thread with interest.
so enough of the practicing, onto the build:
https://www.aulro.com/afvb/images/im...011/07/111.jpg
Disco body now all cut up and painted in POR15's Raptor Ute liner
https://www.aulro.com/afvb/images/im...011/07/112.jpg
While I was at it I gave the chassis a good degrease and a couple of coats of chassis black:
https://www.aulro.com/afvb/images/im...011/07/113.jpg
The back of the D1 chassis was adapted to fit the larger D2 fuel tank - just the mounts as the chassis is similar spacing!
https://www.aulro.com/afvb/images/im...011/07/114.jpg
Then the BIG change, I changed my mind on what to power the beast as a low km Disco 2 Td5 with ZF Auto became available so the engine mounts were cut off and some Disco Td5 ones added:
https://www.aulro.com/afvb/images/im...011/07/115.jpg
then along came the realisation of the wiring!!!
https://www.aulro.com/afvb/images/im...011/07/116.jpg
some of you will reconise the build site! BIG Thanks to Erich and Sheila for putting up with all my junk!
https://www.aulro.com/afvb/images/im...011/07/109.jpg
and Andy and Phil for all their work
https://www.aulro.com/afvb/images/im...011/07/110.jpg
Now another BIG Thanks to Nick and the Australian Importer as my car arrived last week, unfortunately it also brought some of the Northern English weather with it - arrived Tuesday and didnt stop raining till Friday!!!
https://www.aulro.com/afvb/images/im...011/07/105.jpg
https://www.aulro.com/afvb/images/im...011/07/106.jpg
https://www.aulro.com/afvb/images/im...011/07/107.jpg
And the easy way to load and unload:
https://www.aulro.com/afvb/images/im...011/07/108.jpg
cool.
Oooooo nice:D
Baz.
I'm liking this too! :cool:
I am just an eencie weencie massive bit jealous :)
good to see the progress :)
looking good. :cool:
what color are you going for? or is that part of the big reveal at the expo?.
must return the belt and pulley i borrowed. :angel: