Hi there,
Has anyone tried this mod with the Eurovox unit? Any advice?
Would it not just be better to get a new head unit with all the mod cons already installed ?
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
- I bought an extension 3.5 jack cable.
- Cut it in half (so I now have a male and female socket).
- Soldered is as instructed.
- guided the 2 wires through the dash into the glove box.
Well, . . it works, I have a real nice sound.
I used an old iPhone to test it.
Problem is with the steering wheel controls I can’t skip numbers.
If I want to skip the display of the radio shows following message; 'SEEK >>'.
So it moves a few seconds forward in the song I think and is not skipping.
I checked the wiring and it is correct.
Is this due to the old iPhone or did I miss something?
Hope somebody can help me out.
Regards from the Netherlands ;-)
Hans
Ditto, I replaced my single disc Eurovox player and multi disc under seat DVD unit ( both US as the disc laser was gone in both) with a sub $200 Pioneer with all the mod cons.Would it not just be better to get a new head unit with all the mod cons already installed ?
Those old units would now be at the end of their life. I can understand someone with a RRC that they feel is going to be worth something , but a D2?
Regards PhilipA
This thread has prompted me to give away my old Single Disc, DVD stacker,screen and headphones so look in Give Aways if you are interested.
The screen has brackets and mouldings.
Last edited by PhilipA; 22nd September 2019 at 09:11 AM.
Hi! Does anyone know what pin numbers on IC are used as Tape input?
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks