Results 1 to 4 of 4

Thread: 14cux fault code reader installation link

  1. 17th December 2012, 10:20 AM #1
    Richard93Vogue's Avatar
    Richard93Vogue
    Richard93Vogue is offline Master
    Join Date
    Jun 2010
    Location
    Maitland
    Posts
    285
    Total Downloaded
    0

    14cux fault code reader installation link

    http://www.shengltd.com/tvrextras/do...Xconnector.pdf

    If you have bought a RRC fault code reader like I have from a US wreckers, here is a good set of instructions for fitting it.

    It is from Steve Heath Engineering shengltd.com
    Reply With Quote Reply With Quote
  2. 17th December 2012, 12:29 PM #2
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Australian spec cars ( well 92 RRCs for sure)do not have the correct connectors. You have to connect them to the 40 pin plug. The connectors in the 40 pin plug are injector terminals and go in from the front.
    I only connected the signal wires and have a separate 12v and earth wires which I run to a cigarette lighter plug.
    This is mainly because I have lots of extra wires in the 40 pin plug from the o2 sensors and it is getting crowded in there, especially as I have used shielded cable from the sensors.
    Regards Philip A
    Reply With Quote Reply With Quote
  3. 17th December 2012, 02:38 PM #3
    Richard93Vogue's Avatar
    Richard93Vogue
    Richard93Vogue is offline Master
    Join Date
    Jun 2010
    Location
    Maitland
    Posts
    285
    Total Downloaded
    0
    Hi PhilipA,

    Say, have you ever come across anywhere to buy the ecu plugs, male and female to suit the 14cux? I am building a megasquirt and want to make an adaptor to plug into the loom. I have searched google and can find the brand and part number but no supplier. 40-pin Amphenol connector (part number 143-70011).

    Richard.
    Reply With Quote Reply With Quote
  4. 17th December 2012, 08:21 PM #4
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    The sockets are the same as the sockets in injector plugs, ie the ones on top (side?) of injectors.
    I bought some on ebay.
    EV6 Female USCAR Fuel Injector Electrical Connector Components No Soldering | eBay
    These are the complete socket but include the socket.
    Get in there and search maybe the US ebay and UK as well as Oz, but I got mine in Oz. try a few different terms.
    Regards Philip A
    Reply With Quote Reply With Quote
« 12v Compressor Fridge Build | 100" 109 series coil cab ute. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!