I have made a start on a draw system for the rear of the 90
The base is standard with a full length & 650 wide draw with a nook on the drivers side.
The 40Lt Trailblazer will be on the passengers side on a slide beside that will be 3 draws. these draws will only be 650 in depth so there will be room between them and the seats for more storage.
Well the truck is in the panel shop but i managed to get the draw bits out of it.
I have made a little progress but broke the head of the nut sert tool (6mm hardened steel).
All the runners are ordered & should be delivered Tuesday then it will really start to look like something.
I orded 1 250Kg lock in/out runner for the base draw. 1 125Kg lock in/out runner for the fridge slide and 3 60Kg lock in/out for the draws beside the fridge.
Final made some more progress on the draw system in the 90.
Got the fridge in & working.
Another advantage of the Trailblazer you can bolt the runners directly to the body of the fridge as long as you do not fix above the low rivets.
Just need to install a small temporary barrier that will allow me to mount a number of electronic devises to then i can use these things over the break.
There is still more things to do before totally complete.
Cheers
David
Reply With Quote
Master
Posting Permissions
Bookmarks