Slip the wires behind the grill after taken out the 3 lug screws on top
Slip the wires behind the grill after taken out the 3 lug screws on top
The Fuse box![]()
Hi welshman, I take it, that roll of wire is going to be used for your control wire, it’s much to small for power supply use.
Cheers
yep the 2mm is for the control wire. Bought all the same color wire as i am a tight ass. Should be making the final cut tonight and linking the control wires in. Fingers crossed.
Also be carfull of the relays as the numbers are in different places on the ones that i bought to those on the diagram.ops: only noticed when i was doing the final check.
Good one welshman and let us know how it all goes.
Cheers :wink:
Hi Drivesafe
Ive been following this for a while know.Any chance of you marketing DIY kits in the future???
Is there "relay holders" available,so replacement relays can be plugged/un-plugged as per car fuse blocks???
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
Just about to clip in to the main head light popped the back off the old plug.
Cable tie to the front grill
Be very carfull not to touch any of the relays the the bare bit of earth wire as you will end up with a firework show as i did. Lucky i just blew a fuse in the new fuse box.ops:
ops:
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks