Developing HD plastic sill tanks for Defender

Quote:

---

Originally Posted by towe0609

and I thought I might get a bargain on a prototype

Seriously though, I don't need one, but I'm so impressed with what you are doing I want one. Amazing stuff.

---

I hope Andy is using the dissected one for a promo - good to show people how thick they are. Also, take a hammer to the show with you and let everyone have a crack at it... great for marketing!

Quote:

---

Originally Posted by Shingleback

The tank basically follows the underside of the floor with about 30mm clearance

---

30mm clearance.....I'm thinking it looking better

I have Mulgo side steps....I believe Daniel will also be at film festival this weekend, would you mind having a look at his side steps to see if the plates will interfere with the tank....there is some adjustment and mine can go out further.

https://www.aulro.com/afvb/images/im...017/02/255.jpg

Quote:

---

Originally Posted by rijidij

You can get a gauge with a transfer pump switch and it has a warning buzzer when low so you don't leave the pump running. More details



Cheers, Murray



https://www.aulro.com/afvb/images/im...017/02/498.jpg

---

Just noticed that level gauge/switch is on the size of a 10c piece.

Quote:

---

Originally Posted by weeds

I have Mulgo side steps....I believe Daniel will also be at film festival this weekend, would you mind having a look at his side steps to see if the plates will interfere with the tank....there is some adjustment and mine can go out further.

https://www.aulro.com/afvb/images/im...017/02/255.jpg

---

Those side steps look to be mounted similar to mine so shouldn't be a problem. If Daniel is at the film festival I'll say g'day and check his out

Quote:

---

Originally Posted by Shingleback

Not sure what you mean tombie? The straps are 50mm steel with rubber protection

---

A sort of bash plate below them... whilst the tanks will be pretty darn solid dragging a rock could easily hook and tear out a strap..

Quote:

---

Originally Posted by Tombie

A sort of bash plate below them... whilst the tanks will be pretty darn solid dragging a rock could easily hook and tear out a strap..

---

Yeah have thought of that, would be easy enough to make a bash plate if people are worried. I'll be testing mine without and reckon it will be fine as they are very well tucked up, will see.

Got it all plumbed and wired up and filled it up! Happy to say that I used a high flow pump full bore no worries at all, got about 70L before it clicked off then finished filling a bit slower but all up a very quick fill. I got 86 litres in which is still pretty good. The three breathers are just off the top of the tank so there must be about a 10 litre air gap for expansion.


Sent from my E5823 using AULRO mobile app

Nice work......I cannot remember, have you made both moulds?? Or you still working on the first side??

Quote:

---

Originally Posted by weeds

Nice work......I cannot remember, have you made both moulds?? Or you still working on the first side??

---

No just the one mould, thinking that there might be more demand for the 110 so might start that one next ;) once I'm happy it all works as required I'll start making more moulds and they will be heaps quicker to make as there won't be the same r&d and trial and error involved.