Page 35 of 35 FirstFirst ... 25333435
Results 341 to 349 of 349

Thread: V8 county ute

  1. #341
    Join Date
    May 2009
    Posts
    927

    V8 county ute

    Nah, only joking re the 6wd.
    New house purchase,so loading up new diff and spares in the tray and drive to the new place once I get my new radiator from Aussie Desert Coolers, should be early this week.
    The ute project has taken a back seat lately as other things have taken priority.
    But the good news is the new place has 3000 m2 of flat land , with about 80m2 of it screaming at me to put a shed on it.
    Unlike the beautiful but steep country we are in now.

  2. #342
    Join Date
    May 2009
    Posts
    927
    I picked up a new radiator today. Aussie Desert Coolers.
    It took a bit longer than we first agreed but the fit is top notch.
    In she goes

    A quick test for leaks and back to domestic duties.
    Settle on new house tomorrow and first open for inspection on current one Saturday.

  3. #343
    Join Date
    May 2009
    Posts
    927
    Wow 8 months later, house shift done , hopefully the last one before I go underground or in the ovenV8 county ute.
    Iíve found a bit of time and motivation to get some Landy related stuff done.
    Some not that photo worthy but flex shots are always interesting.

    Removed rear anti roll bar

    Removed shock top bolt



  4. #344
    Join Date
    May 2009
    Posts
    927
    Underneath
    A bit of rubbing on the seat belt mounting bracket, that I can lose.

    Full tuck, the tyres are 33Ē still undecided if I should risk 37ís or stick to my original plan of 35ís , any way a bump stop extension looks like itís on the cards.sitting on the bump stops ( no springs)

  5. #345
    Join Date
    May 2009
    Posts
    927

  6. #346
    Join Date
    May 2009
    Posts
    927
    Just s few shots I thought interesting
    No springs , no shocks, sitting on bump stops and the trailing arm is horizontal with only the slightest amount of load on the bushes, one would think they could have angled the mount further.
    But Iím no engineer.

  7. #347
    Join Date
    May 2009
    Posts
    927

    Tray sides , alloys, tyres with tread that donít stick out too far.

  8. #348
    Join Date
    May 2009
    Posts
    927
    Tonightís episode - centre console.

    An old template

    Some 3mm ally sheet

    Like a 🥊
    Underneath

  9. #349
    Join Date
    May 2009
    Posts
    927
    Iím using a rrc hand brake up next to the seat

    Done
    Centre the holes for shifter
    Rivnuts the hillbilly way

    Fitted


    That all folks.

Page 35 of 35 FirstFirst ... 25333435

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!