Printable View
https://uploads.tapatalk-cdn.com/201...a309be2401.jpghttps://uploads.tapatalk-cdn.com/201...05236092c0.jpghttps://uploads.tapatalk-cdn.com/201...bffb1445b2.jpghttps://uploads.tapatalk-cdn.com/201...5bbbaccd55.jpghttps://uploads.tapatalk-cdn.com/201...62070c3a69.jpghttps://uploads.tapatalk-cdn.com/201...ffa9e92052.jpghttps://uploads.tapatalk-cdn.com/201...5f2d885159.jpg
Oh goody a update [thumbsupbig]
Been too long between drinks [wink11]
I really need to get my finger out, little steps help to reignite the motivation.
Nothing like a bit of CAD (cardboard aided design) to get something to work. 👍
Tonight’s episode “ shifter console pt2”https://uploads.tapatalk-cdn.com/201...1c1bd922c8.jpghttps://uploads.tapatalk-cdn.com/201...ca10c4fc99.jpghttps://uploads.tapatalk-cdn.com/201...469a5e54da.jpghttps://uploads.tapatalk-cdn.com/201...baa4f5aa80.jpghttps://uploads.tapatalk-cdn.com/201...e545e7655f.jpghttps://uploads.tapatalk-cdn.com/201...9539621da4.jpg
https://uploads.tapatalk-cdn.com/201...59a7bbed8a.jpghttps://uploads.tapatalk-cdn.com/201...c6aaaccf97.jpghttps://uploads.tapatalk-cdn.com/201...7b30937079.jpghttps://uploads.tapatalk-cdn.com/201...4efd6dcc59.jpghttps://uploads.tapatalk-cdn.com/201...88755b0fa0.jpghttps://uploads.tapatalk-cdn.com/201...4ae1b8c796.jpg
https://uploads.tapatalk-cdn.com/201...34a73e7f7a.jpghttps://uploads.tapatalk-cdn.com/201...c1fc56057b.jpghttps://uploads.tapatalk-cdn.com/201...efddba5053.jpghttps://uploads.tapatalk-cdn.com/201...66e5e083bf.jpghttps://uploads.tapatalk-cdn.com/201...2a04dc1cf0.jpghttps://uploads.tapatalk-cdn.com/201...e113ad29ff.jpg
https://uploads.tapatalk-cdn.com/201...dd34967dee.jpghttps://uploads.tapatalk-cdn.com/201...6ab0324ef7.jpghttps://uploads.tapatalk-cdn.com/201...595099f8ca.jpghttps://uploads.tapatalk-cdn.com/201...596f9d11ce.jpghttps://uploads.tapatalk-cdn.com/201...8435f4b7db.jpghttps://uploads.tapatalk-cdn.com/201...4c431f02da.jpghttps://uploads.tapatalk-cdn.com/201...859dc97d5b.jpg
That’s all folks
Some vinyl for the shifter
https://uploads.tapatalk-cdn.com/201...ef4a9d6fa5.jpghttps://uploads.tapatalk-cdn.com/201...1c67b8e510.jpg
And the base plate
https://uploads.tapatalk-cdn.com/201...e5f1c782e8.jpg
I had previously trimmed of the detent between 2nd and 3rd but didn’t like it so going back to factory https://uploads.tapatalk-cdn.com/201...e5002a217e.jpg
https://uploads.tapatalk-cdn.com/201...474b9d412f.jpg
Cleaned and lubed
The height of the cubby box made 1 and 2 shifts quite difficult, and given the size of the cubby box makes it a bit of a “black hole” I’ll trim 100mm off.https://uploads.tapatalk-cdn.com/201...6ac9c265e5.jpghttps://uploads.tapatalk-cdn.com/201...2bcf4dfcd5.jpg
I struck it rich, the earliest is 1980.https://uploads.tapatalk-cdn.com/201...58735d5faf.jpghttps://uploads.tapatalk-cdn.com/201...b850f4a064.jpg
Trim time
https://uploads.tapatalk-cdn.com/201...dbe8784ac0.jpghttps://uploads.tapatalk-cdn.com/201...66d5981553.jpg