-
4th March 2018, 08:06 PM
#341
V8 county ute
Nah, only joking re the 6wd.
New house purchase,so loading up new diff and spares in the tray and drive to the new place once I get my new radiator from Aussie Desert Coolers, should be early this week.
The ute project has taken a back seat lately as other things have taken priority.
But the good news is the new place has 3000 m2 of flat land , with about 80m2 of it screaming at me to put a shed on it.
Unlike the beautiful but steep country we are in now.
-
15th March 2018, 06:37 PM
#342
I picked up a new radiator today. Aussie Desert Coolers.
It took a bit longer than we first agreed but the fit is top notch.
In she goes
A quick test for leaks and back to domestic duties.
Settle on new house tomorrow and first open for inspection on current one Saturday.
-
4th November 2018, 06:41 AM
#343
Wow 8 months later, house shift done , hopefully the last one before I go underground or in the oven.
I’ve found a bit of time and motivation to get some Landy related stuff done.
Some not that photo worthy but flex shots are always interesting.
Removed rear anti roll bar
Removed shock top bolt
-
4th November 2018, 06:50 AM
#344
Underneath
A bit of rubbing on the seat belt mounting bracket, that I can lose.
Full tuck, the tyres are 33” still undecided if I should risk 37’s or stick to my original plan of 35’s , any way a bump stop extension looks like it’s on the cards.sitting on the bump stops ( no springs)
-
4th November 2018, 06:51 AM
#345
-
5th November 2018, 08:18 PM
#346
Just s few shots I thought interesting
No springs , no shocks, sitting on bump stops and the trailing arm is horizontal with only the slightest amount of load on the bushes, one would think they could have angled the mount further.
But I’m no engineer.
-
6th November 2018, 03:27 PM
#347
Tray sides , alloys, tyres with tread that don’t stick out too far.
-
8th November 2018, 06:46 PM
#348
Tonight’s episode - centre console.
An old template
Some 3mm ally sheet
Like a 🥊
Underneath
-
8th November 2018, 06:52 PM
#349
I’m using a rrc hand brake up next to the seat
Done
Centre the holes for shifter
Rivnuts the hillbilly way
Fitted
That all folks.
-
19th November 2018, 07:21 PM
#350
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks