Hit with a stomach bug today, but managed to get the wing top intake together before I excreted all my energy. [emoji378][emoji722]️[emoji372][emoji95]
Thanks to DiscoClax for pointing me in the right direction for the welding. The wing top intake is made from an aluminium vent cover sourced from the states, a cast 3" tight radius bend from china (ebay) and a straight bit of pipe - all welded together. Safari snokel head sits on top and an extension hose can be run to roof when wading (almost never happens). It will go in for a powdercoat on Monday, should look alright. [emoji41]
Quite pleased with the air filter mount, the straps had to be very close together which was a worry but it holds firm, no wobble. Clearance out to the wing and near the PS bottle is tight but it should be ok. Will need to keep an eye out for rubbing. Best thing is air filter can be swapped out the back without having to remove the box. Previous set up required air box removal which was a pain.
https://www.aulro.com/afvb/images/im...018/03/265.jpghttps://www.aulro.com/afvb/images/im...018/03/266.jpghttps://www.aulro.com/afvb/images/im...018/03/267.jpg